Blown Soarer
Trending Topics
12-06-03, 08:30 PM
#9
Rookie
Join Date: Oct 2003
Location: California
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
awesome looking engine. IS that the Sc400 or 300?? Also, how much did it run you, and by whom is it made and did u have trouble making the hood cover it???
But once again, sweet engine!
But once again, sweet engine!
Last edited by =BANKS=; 12-06-03 at 08:33 PM.
12-07-03, 12:29 AM
#10
Driver School Candidate
Join Date: Jun 2002
Location: Alabama
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Ok,,Dyno'd on Friday night...Is now 176Kw ATW with 604Nm of Torque on 0.5 pounds of boost....Will now play with pulley sizes all the way upto 6 psi boost...ECU was setting the mixtures absoluty perfect...
Took it on about a 600k run saturday,,,never missed a beat...I beat a TT from the lights..Pulled VERY good...I have a 2,700 Stally & a Stage 1 Shift Kit in it..
Tried it with 300cc Supra Injectors..(No good) To Rich...Put the STD 220cc ones back...Perfect..
Engine took everything the Blower had on offer..
I have spent a whole week working the fitment out...have a few more things to change....This is a Plug & Play setup I am going to complete....
I must say...There is going to be some thought put into designing the Blower to suite the States...
1st Obstacle...I only have Australian Fuel to work with @ 98 RON
2nd...EGR
3rd....Emmisions from your Fuel and Loss of EGR ??
Can anyone there tell me what your Emmisions must read ??? Lambda ?? Nox ??? Etc..
If you can get through your emmisions without an EGR,,then you can bolt this on.....Using a Modded ECU from here (Yes David I am still having yours worked on)heheh...You can Fully Program the Mixtures to suite..
The Blower gives out NO Noise at all....
No Mod to Bonnet at all.....Seeing you dont get the Active.....Bonnet clearance is better..
But I have to Design this Blower with Altenates for you...Like with or without Trac Control..
Some bits can be purchased over there to save on costs...Like a Malpassi rising Rate Fuel Press Reg..AUD $280...US$ ??? Serpintine belt 6PK2700 AUD$80 US$ ???
Factory Fuel pump is supplying enough...But if needed latter a Walbro is a Great Cost effective replacement....$100US...
Well,,Lets all see what the outcome of all this is gunna be,,
Took it on about a 600k run saturday,,,never missed a beat...I beat a TT from the lights..Pulled VERY good...I have a 2,700 Stally & a Stage 1 Shift Kit in it..
Tried it with 300cc Supra Injectors..(No good) To Rich...Put the STD 220cc ones back...Perfect..
Engine took everything the Blower had on offer..
I have spent a whole week working the fitment out...have a few more things to change....This is a Plug & Play setup I am going to complete....
I must say...There is going to be some thought put into designing the Blower to suite the States...
1st Obstacle...I only have Australian Fuel to work with @ 98 RON
2nd...EGR
3rd....Emmisions from your Fuel and Loss of EGR ??
Can anyone there tell me what your Emmisions must read ??? Lambda ?? Nox ??? Etc..
If you can get through your emmisions without an EGR,,then you can bolt this on.....Using a Modded ECU from here (Yes David I am still having yours worked on)heheh...You can Fully Program the Mixtures to suite..
The Blower gives out NO Noise at all....
No Mod to Bonnet at all.....Seeing you dont get the Active.....Bonnet clearance is better..
But I have to Design this Blower with Altenates for you...Like with or without Trac Control..
Some bits can be purchased over there to save on costs...Like a Malpassi rising Rate Fuel Press Reg..AUD $280...US$ ??? Serpintine belt 6PK2700 AUD$80 US$ ???
Factory Fuel pump is supplying enough...But if needed latter a Walbro is a Great Cost effective replacement....$100US...
Well,,Lets all see what the outcome of all this is gunna be,,
12-08-03, 07:45 PM
#12
Lexus Test Driver
iTrader: (4)
Join Date: Jul 2003
Location: Tennessee
Posts: 831
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by =BANKS=
awesome looking engine. IS that the Sc400 or 300?? Also, how much did it run you, and by whom is it made and did u have trouble making the hood cover it???
But once again, sweet engine!
awesome looking engine. IS that the Sc400 or 300?? Also, how much did it run you, and by whom is it made and did u have trouble making the hood cover it???
But once again, sweet engine!
*EDIT* Errr, it's the Soarer 4.0
My bad...
Last edited by RSTSpeed; 12-08-03 at 07:48 PM.
12-08-03, 07:53 PM
#13
Lexus Test Driver
iTrader: (4)
Join Date: Jul 2003
Location: Tennessee
Posts: 831
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by AussieSoarer
is a Plug & Play setup I am going to complete....
I must say...There is going to be some thought put into designing the Blower to suite the States...
1st Obstacle...I only have Australian Fuel to work with @ 98 RON
2nd...EGR
3rd....Emmisions from your Fuel and Loss of EGR ??
Can anyone there tell me what your Emmisions must read ??? Lambda ?? Nox ??? Etc..
If you can get through your emmisions without an EGR,,then you can bolt this on.....Using a Modded ECU from here (Yes David I am still having yours worked on)heheh...You can Fully Program the Mixtures to suite..
is a Plug & Play setup I am going to complete....
I must say...There is going to be some thought put into designing the Blower to suite the States...
1st Obstacle...I only have Australian Fuel to work with @ 98 RON
2nd...EGR
3rd....Emmisions from your Fuel and Loss of EGR ??
Can anyone there tell me what your Emmisions must read ??? Lambda ?? Nox ??? Etc..
If you can get through your emmisions without an EGR,,then you can bolt this on.....Using a Modded ECU from here (Yes David I am still having yours worked on)heheh...You can Fully Program the Mixtures to suite..
lol!
12-09-03, 02:51 PM
#14
Lexus Test Driver
Join Date: Feb 2001
Location: California
Posts: 1,195
Likes: 0
Received 0 Likes
on
0 Posts
Great blower but...
Okay great supercharger set up but WHAT is up with those HIDEOUS BLUE wipers!!!!!?????
Please man..I'm not even wearing shades and haven't eaten yet! =)
Give the car some nice piaa wiperblades and give your supercar some justice =)
Please man..I'm not even wearing shades and haven't eaten yet! =)
Give the car some nice piaa wiperblades and give your supercar some justice =)
12-09-03, 04:09 PM
#15
Rookie
Thread Starter
Join Date: Jun 2003
Location: International
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
HAHAHAHHAHAHA You dont like my $10 Blue Wipers...
Wait until ya see inside my car...heheheheheh..EL Blue wire all around the dash and console...And I'm 43 Years Old,,,hahahahah.......Gotta show the Youngens what to do...hehehehehe
This Old Dog is a Mad Pumper...:thumbup
Wait until ya see inside my car...heheheheheh..EL Blue wire all around the dash and console...And I'm 43 Years Old,,,hahahahah.......Gotta show the Youngens what to do...hehehehehe
This Old Dog is a Mad Pumper...:thumbup