1CleanSC

Hey!

So I'm in the process of rebuilding my R154 out of an actual soarer and I want to replace the tripod bushings with solid aluminum ones since these look like they are starting to rot. All I've seen so far are bushings for $90+ and I'm not even sure if they fit the 97+ JSpec R154 trans out of the soarer! Any help would be greatly appreciated! Thanks!

Boergy

iTrader: (2)

i have my bushings from here: http://www.ebay.com/itm/TOYOTA-SUPRA-SHIFTER-MK4-MKIV-BUSHINGS-BUSHING-T-/121086284476?pt=Motors_Car_Truck_Parts_Accessories&hash=item1c314e12bc
TDIY says, the bushing are the same original bushings as in my 96 tripod W58 and the from summit fits perfect



greets

Tom

1CleanSC

So are the tripod bushings sizes the same for the v160, r154 and w58?

Boergy

iTrader: (2)

yes, all the same parts (numbers the same)

czar07

All the same bushings. Marks Engineering in Aus also sells some

BAD954BOI

iTrader: (5)

Does any of you guys have the part number for the tripod it self?

my mechanic dropped the tranny and broke the tripod. he is paying!

Vrank

iTrader: (4)

Tripod Depends on trans

BAD954BOI

iTrader: (5)

It's a r154

Vrank

iTrader: (4)

there's no us counterpart for this, so good luck. I've broken a getrag one and had a friend weld it together, worked fine.

33575-22262 is the part number for this