Performance & Maintenance Engine, forced induction, intakes, exhausts, torque converters, transmissions, etc.

Help my 1jz auto dies!

Old 07-12-14, 02:49 PM
  #1  
rwdpwr
Rookie
Thread Starter
 
rwdpwr's Avatar
 
Join Date: Mar 2007
Location: FL
Posts: 89
Likes: 0
Received 0 Likes on 0 Posts
Default Help my 1jz auto dies!

hello ive tried changing all of my fuses and problem is still persisting. when i turn key there is no response from anything. the dash lights stay on as if nothing was actuated.
i jumped my starter from the relay and car cranks up fine in park and neutral.
heres the kicker.
after starting the car i can shift into any gear as long as i do it really quickly but if try to go from P to Reverse, the car will go into gear and stay on. Now when i trow it into neutral the car stalls out immediately. This has never happened before and ive had this car swapped for years. same with D, if i turn on the car in P and shift to D quickly it stays on. even if i do O/D, 2nd, and 1st. just when i shift into neutral, the car stalls, immediately. could this be a NSS or ECU issue? im so confused
like i said this swap has run flawlessly till recently and i have no idea why it dies when shifting into neutral
Any suggestions or help??
thanks in advanced
henry
Old 07-12-14, 07:25 PM
  #2  
BiGEZ
Instructor
iTrader: (24)
 
BiGEZ's Avatar
 
Join Date: Oct 2009
Location: Georgia
Posts: 1,075
Received 138 Likes on 114 Posts
Default

Are you using the Soarer ECU? It could be the ECU they are know to go bad. Also check all the connections on the tranny.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
JonBlaze2g
SC- 1st Gen (1992-2000)
2
01-05-15 11:40 AM
estomax
Performance & Maintenance
1
10-07-14 04:52 PM
dandd2
Performance & Maintenance
1
01-24-13 07:16 AM
Yahoo27
Performance & Maintenance
2
12-09-09 05:49 PM
AB85
Performance & Maintenance
2
07-02-09 02:34 AM


Thread Tools
Search this Thread
Quick Reply: Help my 1jz auto dies!



All times are GMT -7. The time now is 07:21 PM.