Notices
SC - 1st Gen (1992-2000)

issues with 95 sc400

Thread Tools
 
Search this Thread
 
Old Mar 26, 2014 | 08:45 AM
  #1  
hockleyta's Avatar
hockleyta
Thread Starter
Driver School Candidate
 
Joined: Jan 2011
Posts: 4
Likes: 0
From: pa
Default issues with 95 sc400

To all, my car was riding ok after major work on it. It had a little bit of shake while ideling but it was riding fine. I replaced the distributor cap and now i have all kinds of issues. I had the distributor in upside down. I did not realize there was a knotch on the distributor. i took it out and inserted correctly. The car seems to be ideling very low. I ran it last night and it seemed to do good but now when i drive it the tack will go up but the care will not go over 20 miles an hour. Any idea's. There are no check engine lights on
Reply
Old Mar 26, 2014 | 11:52 AM
  #2  
SpooledSC's Avatar
SpooledSC
Driver School Candidate
iTrader: (1)
 
Joined: Mar 2014
Posts: 33
Likes: 0
From: FL
Default

Originally Posted by hockleyta
To all, my car was riding ok after major work on it. It had a little bit of shake while ideling but it was riding fine. I replaced the distributor cap and now i have all kinds of issues. I had the distributor in upside down. I did not realize there was a knotch on the distributor. i took it out and inserted correctly. The car seems to be ideling very low. I ran it last night and it seemed to do good but now when i drive it the tack will go up but the care will not go over 20 miles an hour. Any idea's. There are no check engine lights on
Reset ECU (Remove negative/positive battery terminal for 20 mins) and check to make sure your base timing is ok (with timing light.) Report back findings. It's not a coincidence that your car stared acting up after you messed with it.
Reply
Old Mar 26, 2014 | 03:21 PM
  #3  
SC400slide's Avatar
SC400slide
In Recovery Mode
CL Folding 25,000
iTrader: (11)
 
Joined: Apr 2012
Posts: 3,871
Likes: 36
From: NM
Default

Your distributor might have un wound again and got caught up. I know a friend who had this happened after he replaced the distributor.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
richardm9
SC - 1st Gen (1992-2000)
2
Aug 31, 2017 03:38 AM
over40driv
SC - 1st Gen (1992-2000)
9
Aug 12, 2008 05:58 PM
stokdd
SC - 1st Gen (1992-2000)
5
Aug 3, 2006 11:39 PM
JZ30
SC - 1st Gen (1992-2000)
8
Jun 25, 2003 09:50 AM




All times are GMT -7. The time now is 09:15 AM.