Need help from someone with a soarer 1jz swap
#1
Driver School Candidate
Thread Starter
iTrader: (1)
Join Date: Apr 2013
Location: Florida
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Need help from someone with a soarer 1jz swap
I am currently repairing part of my soarer harness which runs to the Igniter, and I need someone to help me out by taking a picture of the wires to their igniter plug, or just post on here with the color order of the igniter wires. I've found pictures online but they aren't clear enough to make out the wires correctly. If someone could do that and post them here, or send them to me that would be amazing. Thanks in advance!
Last edited by VisiSC; 10-18-13 at 06:00 PM.
#2
Lexus Test Driver
iTrader: (4)
I would use pinouts instead. Color can get you in trouble. Google search 2jzgte igniter pinout and jzz30 pinout. Or google search 95 mk4 tsrm. I used mk4 gte diagrams as a reference when I built my gfs aristo harness for her sc. Circuitry is the same. So just trace from igniter to ecu, 1j functions are named the same. Ex: igt is pin X at ecu, goes to igniter pin x. Igc at igniter pin x goes to coil x, etc
#3
Driver School Candidate
Thread Starter
iTrader: (1)
Join Date: Apr 2013
Location: Florida
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
I would use pinouts instead. Color can get you in trouble. Google search 2jzgte igniter pinout and jzz30 pinout. Or google search 95 mk4 tsrm. I used mk4 gte diagrams as a reference when I built my gfs aristo harness for her sc. Circuitry is the same. So just trace from igniter to ecu, 1j functions are named the same. Ex: igt is pin X at ecu, goes to igniter pin x. Igc at igniter pin x goes to coil x, etc
Thread
Thread Starter
Forum
Replies
Last Post
6SOARER
SC- 1st Gen (1992-2000)
6
09-05-11 07:35 AM