Passenger door won't open from inside or outside
Door handel moves, but no tension. you can hear the actuator when locking and unlocking the door.
|
Try moving your window up or down in small in crements and use your inside handle to open it.
|
Originally Posted by PJSC300
(Post 8151806)
Door handel moves, but no tension. you can hear the actuator when locking and unlocking the door.
|
Originally Posted by PJSC300
(Post 8151806)
Door handel moves, but no tension. you can hear the actuator when locking and unlocking the door.
|
Originally Posted by Brianmoss
(Post 8151877)
Try moving your window up or down in small in crements and use your inside handle to open it.
|
Originally Posted by SC400slide
(Post 8151976)
Sounds to me like you might have broken the handle "arm" that goes from the exterior handle, down to the latch assembly, inside the door. If that was the case, then you might need an exterior handle latch clip that holds the arm in place. A $5.88 part at most Lexus dealerships.
|
Originally Posted by cali108
(Post 8151942)
Is that the blue Sc300 5 speed for sale on CL?
|
Originally Posted by firefly
(Post 8152130)
It's the green 5 speed on cl, do you know the car?
|
I'd just break the window if I was in your situation. clean up as much of the glass as possible and shine a nice light down where the window was, jimmy the bar to open the door then take the inside panel off, clean the rest of the glass, fix the handle assembly(s)... get another window and install it then look for something else to mess with..
or... I'd also cut a big hole in the door but then i'd have to fix the hole or just get another door. and know forever I don't have an original door, or an original door with a patched hole in it... if this was a ford who cares but it's an SC so this leads me back to the glass plan. you're selling it anyways right? why not spend a few bucks on a window to have a operating door and increase the chance of it selling? nobody wants a 1 door coupe. ;) |
Thanks for all the help guys, might need to break the window as SCstone suggest. Also forgot to mentioned that I just recently got my Lexus and am new to the form.
|
This is the best suggestion, it might be possible without damaging the door or the panel. A little glue will fix the panel pieces.
http://www.planetlexus.com/lexus-for...p/t-16200.html And, it sounds like your bar probably did break. Don't run to the dealer to get that stuff, over 400 bucks for the entire assembly. Go to the pull yard and get one. Hope you get in! Also, keep working the handle. Sometimes, if the connection is just loose, all you need is movement then you can...just...open..the..door! |
can you remove the door panel with out opening the door?
|
IMO, If I was locked out, before I put a hole in the exterior door, I'd rip the panel into two pieces. Just to put that in perspective. There isn't a way to get past the panel without popping out some staples, or tearing something.
|
Originally Posted by PJSC300
(Post 8152703)
Thanks for all the help guys, might need to break the window as SCstone suggest. Also forgot to mentioned that I just recently got my Lexus and am new to the form.
Welcome aboard. |
hey now. I was just saying what I would have done in that situation. i'd rather replace a window than a original door panel/door. still might be able to remove everything you can off the door panel like the speakers and door handles and gain access to the handle rods and open the door and save both the door and window. dunno how much you can access without the door open so i didn't mention it. I had this happen in a friends camaro excpet the locks didn't work either so Ididn't have much choice. fixed both handles and replaced window next day no biggie. =)
|
All times are GMT -7. The time now is 11:26 PM. |
© 2024 MH Sub I, LLC dba Internet Brands