Ali SC3

iTrader: (10)

Anyone know how to remove the drivers side a/c vent to the left of the steering wheel or just the middle part of it for installing a gauge there?

Want to do something like this
https://www.clublexus.com/forums/5510444-post259.html
https://www.clublexus.com/forums/5302500-post252.html
https://www.clublexus.com/forums/sc-...urbo-sc-1.html

I have poked around at it from all angles but I don't want to break any clips unless I have to so I am wondering how much stuff needs to come out to get this thing off, thanks.

lexforlife

iTrader: (7)

need to know as well as i broke a couple of slats trying to remove mine so ali lmk when you know sir ,lol

Ali SC3

iTrader: (10)

will do. there has to be someone who has done it without removing the entire dash I hope.

k7q

iTrader: (37)

i found out for you on my parts car. but broke mines, LOL two phillips screws in front and one in the back. GOOD LUCK reaching the back one. you need to remove the cluster to get to it. i didnt remove the back screw, i just felt it there. hopefully there isnt an extra screw i missed.

k7q

iTrader: (37)

Ali SC3

iTrader: (10)

Awesome, thanks for the sacrifice!! so the 2 on the bottom seem easy to get to, I will try and remove the cluster and see If I can get to the back one. If not I will just yank it then I guess the 2 screws should hold it on well enough after.

k7q

iTrader: (37)

Don't yank. That's how I broke mines. I didn't know there was a screw in the back til after I broke the vent.