Power steering return line ( Low Pressure)
07-14-13, 01:24 PM
#1
Driver School Candidate
Thread Starter
Join Date: Jun 2013
Location: CA
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Power steering return line ( Low Pressure)
So my stock power steering return lines are cracked so i went and bought some 3/8 line. The damn thing will not fit. Anyone have any idea where to find stock sized line? Im guessing stock is 10mm, but nowhere has that size, or even 7/16"
07-17-13, 09:39 PM
#2
Driver School Candidate
3/8" line is the correct size. It takes some muscle to get them on. Tip: Grab a q-tip, soak it in ATF, coat the inside of the new hose with it and give it another shot. Twisting/wiggling while pushing it on seemed to help lol
07-19-13, 12:37 AM
#3
Driver School Candidate
Thread Starter
Join Date: Jun 2013
Location: CA
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Lol @ soak it in atf... Me along with the hose, ground and whole underside were soaked in it. I managed to get it on an inch on each side with some insane muscle. It's ridiculous, there has to be a better solution
Thread
Thread Starter
Forum
Replies
Last Post
mirekti
ES - 1st to 4th Gen (1990-2006)
1
03-11-18 08:54 AM
Mr. Klean
Performance & Maintenance
14
07-12-17 12:03 PM
