Performance & Maintenance Engine, forced induction, intakes, exhausts, torque converters, transmissions, etc.

transmission code

Thread Tools
 
Search this Thread
 
Old 10-28-12, 10:07 AM
  #1  
ScDre
Driver School Candidate
Thread Starter
 
ScDre's Avatar
 
Join Date: Jul 2012
Location: md
Posts: 17
Likes: 0
Received 0 Likes on 0 Posts
Default transmission code

Hello, i was checking my cel codes.for my 94 sc400 , and my over drive light has been flashing for abit now. Problem is i am getting a cel code 38 that i cannot locate for this car. I know it does the flash three times then slight pause, then it will flash 8 times. Just hoping its not causing my transmission making this whistle noise since i brought it from private seller or it may be a faulty code. Replys would be appreciative before i start throwing things at this car
Old 10-28-12, 10:27 AM
  #2  
93MSB
Instructor
iTrader: (8)
 
93MSB's Avatar
 
Join Date: May 2007
Location: Texas
Posts: 983
Received 151 Likes on 100 Posts
Default

that's weird I can't find a code 38 or 83 anywhere. I looked at the engine codes, trans codes, trac codes, abs codes, and srs codes
Old 10-28-12, 10:33 AM
  #3  
ScDre
Driver School Candidate
Thread Starter
 
ScDre's Avatar
 
Join Date: Jul 2012
Location: md
Posts: 17
Likes: 0
Received 0 Likes on 0 Posts
Default

Yea its been throwimg that for awhile, and it seems to have started when i replaced main ecu with used one that came off another sc400
Old 10-28-12, 10:38 AM
  #4  
93MSB
Instructor
iTrader: (8)
 
93MSB's Avatar
 
Join Date: May 2007
Location: Texas
Posts: 983
Received 151 Likes on 100 Posts
Default

did the ecu have the same part #? what is the part # of the new ecu?

the supra tsrm has a code 38 for the trans it's the at fluid temp sensor code.

that new ecu could be wired for a temp sensor, that your trans may not have
Old 10-28-12, 10:59 AM
  #5  
ScDre
Driver School Candidate
Thread Starter
 
ScDre's Avatar
 
Join Date: Jul 2012
Location: md
Posts: 17
Likes: 0
Received 0 Likes on 0 Posts
Default

The one i have now 1uz-fe 42 and other number is 89661- 24410 and the original ecu had i think 89661-24432 i believe
Old 10-30-12, 02:33 AM
  #6  
ScDre
Driver School Candidate
Thread Starter
 
ScDre's Avatar
 
Join Date: Jul 2012
Location: md
Posts: 17
Likes: 0
Received 0 Likes on 0 Posts
Default

The oem ecu that i have is 89661-24431 with big 3A alittle right of that. Hopefully i did not get the wrong ecu that i have been using for over 4 months now on this car. Just seeing if anyone still has any input before i send my original in to get repaired.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Aspect
IS - 2nd Gen (2006-2013)
23
10-28-21 06:21 PM
ScDre
Performance & Maintenance
1
07-09-12 02:47 PM
CallmeQ
GS - 1st Gen (1993-1997)
2
09-26-09 12:19 PM
StiCk3
Performance & Maintenance
4
04-26-08 05:40 AM



Quick Reply: transmission code



All times are GMT -7. The time now is 01:27 PM.