1jzgte high idle
#1
Driver School Candidate
Thread Starter
iTrader: (2)
Join Date: Jan 2012
Location: Tokyo Japan
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
1jzgte high idle
Hey everyone. I just finished my 1jz swap into my sc300 about 45 minutes ago.
Started it up, and its idling way too high. I do not have the tach working, but It sounds like at least 3k RPM's.
I cant find where to adjust the butterfly valve on the throttle body. Or if that is even the problem.
Any ideas?
Has anyone else had this problem?
Thanks
Started it up, and its idling way too high. I do not have the tach working, but It sounds like at least 3k RPM's.
I cant find where to adjust the butterfly valve on the throttle body. Or if that is even the problem.
Any ideas?
Has anyone else had this problem?
Thanks
#2
Driver School Candidate
Thread Starter
iTrader: (2)
Join Date: Jan 2012
Location: Tokyo Japan
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Got it figured out, the vacuum line underneath the throttle body with the little filter on it is supposed to go to the intake manifold. I had it blocked off.
Thread
Thread Starter
Forum
Replies
Last Post
ankurdave
LS - 1st and 2nd Gen (1990-2000)
7
03-13-17 08:20 PM
andres-eh2
RX - 1st Gen (1999-2003)
8
10-22-09 06:51 AM
TGRich
Performance & Maintenance
3
03-05-05 08:27 PM