350Z trans adapter?
02-10-13, 03:36 PM
#166
Driver School Candidate
Join Date: Nov 2011
Location: CO
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
There was talk about the starter teeth not engaging the flex plate due to the distance added by the flywheel adapter. There's a ton of speculation about this whole setup though so I'm not surprised if that's not the case.
02-10-13, 05:45 PM
#168
Driver School Candidate
Join Date: Jan 2013
Location: USA
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Who has a setup that spaces the flex plate away from the crankshaft. For obvious reasons that shouldn't even be tried lol.
02-11-13, 09:48 AM
#169
Driver School Candidate
Join Date: Jan 2013
Location: USA
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Started my own swap thread so I dont junk up the sc300 thread with IS info haha.
https://www.clublexus.com/forums/is-...sion-swap.html
https://www.clublexus.com/forums/is-...sion-swap.html
02-12-13, 09:17 PM
#170
Pole Position
Join Date: Jun 2012
Location: AZ
Posts: 218
Likes: 0
Received 0 Likes
on
0 Posts
I just picked up my brand new trans that I am using for my gte vvti I am working with George and joe that have plates out for sr20's and ka that work great.
I order a spec twin plate but they had the wrong clutches in it when they shipped so I am waiting on replacement nissan ones along with the correct throw out bearing.
I order a spec twin plate but they had the wrong clutches in it when they shipped so I am waiting on replacement nissan ones along with the correct throw out bearing.
02-14-13, 04:21 PM
#171
Driver School Candidate
Join Date: Nov 2011
Location: CO
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
2JZ coupe- Keep us updated on George's work. I'm familiar with his fab work and would like to see what he comes up with. I'm sure he'll work out something for the shifter as well.
02-14-13, 07:07 PM
#172
Adapter on and flex plate on with bolts finger tight:
3 sets of hardware that came with the flywheel adapter. Pretty sure he said to just use one set, which will replace the actual flexplate bolts. waiting for confirmation
Holes all lined up perfectly so far!
3 sets of hardware that came with the flywheel adapter. Pretty sure he said to just use one set, which will replace the actual flexplate bolts. waiting for confirmation
Holes all lined up perfectly so far!
02-14-13, 10:29 PM
#173
Driver School Candidate
Join Date: Jan 2013
Location: USA
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Has anyone with a tranny got a side by side view of the w55/58 next to the cd009. Is the cd009 alot wider where the casings meet in the front of that black cover plate? It looks like its gonna be a tight fit on my is300 in that area.
02-18-13, 11:29 PM
#174
Lexus Test Driver
iTrader: (6)
Join Date: May 2010
Location: Colorado Springs, CO
Posts: 1,442
Likes: 0
Received 4 Likes
on
4 Posts
im back with my trans. finally pulled the plug and started getting everything. THIS IS 1UZ related. HALON IS 2JZ.
milled bellhousing courtesy of kgmade in marrietta ga
shortened shifter courtesy of kgmade in marrietta ga
swap1uz adapter kit with concentric slave spacer, pilot spacer, and hardware
pedals on the way thanks to 8052jz
Still have the flywheel(3sgte lextreme), clutch disc(HD ACT sr20det), pressure plate(HD ACT 3sgte), master cylinder(driftmotion), clutch line(driftmotion) and shifter(oem) to buy. at a bit of a standstill though until i find out what the CEL on my car is and buy new front lcas... my car loves to break on me when i spend money for something fun.
Just thought i'd add my swap in the mix. wont have many more updates after this unless my friends keep sending me pics
milled bellhousing courtesy of kgmade in marrietta ga
shortened shifter courtesy of kgmade in marrietta ga
swap1uz adapter kit with concentric slave spacer, pilot spacer, and hardware
pedals on the way thanks to 8052jz
Still have the flywheel(3sgte lextreme), clutch disc(HD ACT sr20det), pressure plate(HD ACT 3sgte), master cylinder(driftmotion), clutch line(driftmotion) and shifter(oem) to buy. at a bit of a standstill though until i find out what the CEL on my car is and buy new front lcas... my car loves to break on me when i spend money for something fun.
Just thought i'd add my swap in the mix. wont have many more updates after this unless my friends keep sending me pics
Last edited by iridebmx; 02-18-13 at 11:33 PM.
02-19-13, 08:33 AM
#176
Lexus Test Driver
iTrader: (6)
Join Date: May 2010
Location: Colorado Springs, CO
Posts: 1,442
Likes: 0
Received 4 Likes
on
4 Posts
supras and new sc's have abs speed sensors in their hubs, replace a hub with one and buy a abs speed sensor converter. its a hassle, but nissan on toyota your going to have a something bit you in the butt. thats as much as i've come up with no idea if it will really work or not.
