Performance & Maintenance Engine, forced induction, intakes, exhausts, torque converters, transmissions, etc.

grrrr...1jz tach issue...

Thread Tools
 
Search this Thread
 
Old 05-03-10, 12:18 PM
  #1  
StiCk3
Lexus Champion
Thread Starter
iTrader: (5)
 
StiCk3's Avatar
 
Join Date: Oct 2006
Location: IN
Posts: 1,892
Likes: 0
Received 0 Likes on 0 Posts
Default grrrr...1jz tach issue...

I seem to be running into every unknown problem out there....

97 SC300 w/ 1JZ swap. at the point to wire up the tach properly, only thing is that resistor R109 does not exist on my circuit board. Yes i've searched around and yes i've seen the video, and everyone's is different from my tach. The only resistor that resembles R109 is resistor R2. Can anyone confirm a tach fix for the 97+ SCs?
Old 05-03-10, 12:36 PM
  #2  
LexusFTW
Lexus Test Driver
iTrader: (7)
 
LexusFTW's Avatar
 
Join Date: Sep 2005
Location: Tulsa
Posts: 1,459
Likes: 0
Received 0 Likes on 0 Posts
Default

R2 is it .
Old 05-03-10, 03:05 PM
  #3  
AngrySC3
Rookie
 
AngrySC3's Avatar
 
Join Date: Jun 2006
Location: CA
Posts: 71
Likes: 0
Received 0 Likes on 0 Posts
Default

I wired mine directly to the green wire somewhere on the back forgot the number of the pin.
Old 05-04-10, 06:16 AM
  #4  
StiCk3
Lexus Champion
Thread Starter
iTrader: (5)
 
StiCk3's Avatar
 
Join Date: Oct 2006
Location: IN
Posts: 1,892
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by LexusFTW
R2 IT IS .
fixed it for ya

confirmed that R2 works, can't confirm how accurate it is

Last edited by StiCk3; 05-04-10 at 06:50 AM.
Old 03-19-11, 04:09 AM
  #5  
Sag
Rookie
 
Sag's Avatar
 
Join Date: Jan 2010
Location: UnKnown
Posts: 88
Likes: 0
Received 0 Likes on 0 Posts
Default

So...here I go
Have 94 SC300 with 1jz swap
same problem tach does not work,
I saw the video, but I dont have r109 in that place, I have it elsewhere,
Also did not find R2 resistor.
Any ideas?
Old 03-19-11, 04:49 AM
  #6  
Sag
Rookie
 
Sag's Avatar
 
Join Date: Jan 2010
Location: UnKnown
Posts: 88
Likes: 0
Received 0 Likes on 0 Posts
Default

if on the video guy has denso cluster 457952-0984a
I have nippondenso 457952-1411
83010-24483 is the part number,I think, sticker on the cluster.
Old 03-22-11, 02:08 PM
  #7  
Sag
Rookie
 
Sag's Avatar
 
Join Date: Jan 2010
Location: UnKnown
Posts: 88
Likes: 0
Received 0 Likes on 0 Posts
Default

Really need help with this one.
Old 04-02-11, 08:43 AM
  #8  
Sag
Rookie
 
Sag's Avatar
 
Join Date: Jan 2010
Location: UnKnown
Posts: 88
Likes: 0
Received 0 Likes on 0 Posts
Default

cant believe that every one have -92 or 97+ models.
Old 04-02-11, 10:09 AM
  #9  
99SC42
gte & na-t
iTrader: (44)
 
99SC42's Avatar
 
Join Date: Jan 2007
Location: Maryland /Germantown
Posts: 5,139
Likes: 0
Received 7 Likes on 7 Posts
Default

Originally Posted by Sag
cant believe that every one have -92 or 97+ models.
For 92-96 it's R109, what is your question?
Old 04-02-11, 10:50 AM
  #10  
93MSB
Instructor
iTrader: (8)
 
93MSB's Avatar
 
Join Date: May 2007
Location: Texas
Posts: 983
Received 151 Likes on 100 Posts
Default

Sag what year is your car/cluster?
Old 04-03-11, 02:44 AM
  #11  
Sag
Rookie
 
Sag's Avatar
 
Join Date: Jan 2010
Location: UnKnown
Posts: 88
Likes: 0
Received 0 Likes on 0 Posts
Default

My car is 1994 Lexus SC300
here are few pics of my dash back side
sc300dash1.jpg
sc300dash2.jpg
sc300dash3.jpg

As you can see there is no R109 resistor in needed place.
Old 04-03-11, 01:04 PM
  #12  
93MSB
Instructor
iTrader: (8)
 
93MSB's Avatar
 
Join Date: May 2007
Location: Texas
Posts: 983
Received 151 Likes on 100 Posts
Default

you need to jump R73 thats above the center connector. my 95 board matches the part number on yours. They must have started using the new PCB boards at the end of 94

here you can see the matching part number


you can see the jumpered R73 above the center connector


a closer pic of the jumpered R73


close up of R73
Old 04-03-11, 11:31 PM
  #13  
Sag
Rookie
 
Sag's Avatar
 
Join Date: Jan 2010
Location: UnKnown
Posts: 88
Likes: 0
Received 0 Likes on 0 Posts
Default

Thanx alot.
Will try that later on today
PS
where should I insert 330ohm resistor ? For temp gauge fix.
what wire is that ? I mean connector and pin number ?
Old 04-04-11, 07:14 AM
  #14  
93MSB
Instructor
iTrader: (8)
 
93MSB's Avatar
 
Join Date: May 2007
Location: Texas
Posts: 983
Received 151 Likes on 100 Posts
Default

I'm not sure about the temp guage resistor. I left mine as is, it sits at the second mark instead of the middle which doesn't bother me
Old 04-05-11, 12:31 AM
  #15  
Sag
Rookie
 
Sag's Avatar
 
Join Date: Jan 2010
Location: UnKnown
Posts: 88
Likes: 0
Received 0 Likes on 0 Posts
Default

93MSB Thanx alot
finally my dash is alive
feel my self human again.


Quick Reply: grrrr...1jz tach issue...



All times are GMT -7. The time now is 09:28 PM.