Performance & Maintenance Engine, forced induction, intakes, exhausts, torque converters, transmissions, etc.

need quick pic of PS pump vacuum line location

Thread Tools
 
Search this Thread
 
Old 02-04-10, 11:31 AM
  #1  
SRT102JZ
Rookie
Thread Starter
iTrader: (2)
 
SRT102JZ's Avatar
 
Join Date: Jan 2010
Location: TX
Posts: 64
Likes: 0
Received 1 Like on 1 Post
Default need quick pic of PS pump vacuum line location

im in the process of changing out my old leaky stock PS line to the driftmotion one. apparently theres supposed to be two vacuum lines coming almost directly off the pump/reservoir itself BUT for some reason those two lines are non existent on my car and the PS line has never been changed.

does anyone have a picture of where these two lines lead to? i only ask because i need to cap the ends off and want to make sure theyre not being left open


i have the connection on the line where the hoses attatch to but no hoses like circled in the pic here:

Old 02-04-10, 11:45 AM
  #2  
LEX_MAN
Lexus Test Driver
iTrader: (2)
 
LEX_MAN's Avatar
 
Join Date: Aug 2008
Location: IN
Posts: 1,140
Likes: 0
Received 1 Like on 1 Post
Default

Show us the pic of your setup. You might be looking at the wrong side ?

The lines should be under the power steering reservour.
Old 02-04-10, 03:13 PM
  #3  
Luxor
Pole Position
iTrader: (15)
 
Luxor's Avatar
 
Join Date: Jan 2006
Location: Arizona
Posts: 2,331
Received 36 Likes on 31 Posts
Default

One line goes to a vacuum port on the side of the intake manifold, the other connects to a steel line that is located over the upper radiator hose.
Old 02-05-10, 04:51 PM
  #4  
SRT102JZ
Rookie
Thread Starter
iTrader: (2)
 
SRT102JZ's Avatar
 
Join Date: Jan 2010
Location: TX
Posts: 64
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by Luxor
One line goes to a vacuum port on the side of the intake manifold, the other connects to a steel line that is located over the upper radiator hose.
ok well i found the one thats right over the upper radiator hose, it was just left open so i capped it.

as far as the other one goes, all the ones on the intake manifold are connected to hoses as far as i can see.

does anyone have a picture of where this one is?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Meghanw1
SC- 1st Gen (1992-2000)
3
04-14-14 11:37 PM
Piratse
Performance & Maintenance
5
09-06-12 08:23 PM
MrJamison
Suspension and Brakes
4
10-28-11 12:15 AM
UR2klose
Performance & Maintenance
5
02-04-09 10:31 AM



Quick Reply: need quick pic of PS pump vacuum line location



All times are GMT -7. The time now is 02:22 AM.