Fitment question for you 2jzgte'rs
01-17-10, 06:12 PM
#1
Pole Position
Thread Starter
Join Date: Oct 2007
Location: PA
Posts: 358
Likes: 0
Received 0 Likes
on
0 Posts
Fitment question for you 2jzgte'rs
Im trying to do as much as I can before I do the motor install.
Look at this pics and tell me if you guys think the wastegate setup I made is gonna fit and not hit the strut tower.
From the edge of the valve cover too the furthest the wastegate comes out, is pretty much 12".
Now I measured between the strut towers and I got roughly 30". If I center that with the motor, I will not have room and I'll have too relocate.
What do you guys think?
Look at this pics and tell me if you guys think the wastegate setup I made is gonna fit and not hit the strut tower.
From the edge of the valve cover too the furthest the wastegate comes out, is pretty much 12".
Now I measured between the strut towers and I got roughly 30". If I center that with the motor, I will not have room and I'll have too relocate.
What do you guys think?
.
Thread
Thread Starter
Forum
Replies
Last Post
Intellexual
Suspension and Brakes
3
04-02-02 06:18 AM