Originally Posted by Mortal300

Hey Guys,

I just recently purchased a FMIC from BoostLogic and I am having a little bit of trouble fitting the piping on my 1994 SC3.

The old style piping that maybe some of you have...involved 5 pieces. My Passenger Side IC piping fits PERFECTLY.

The issues i am having is with the Driver Side IC Piping.

**It seems that BL was getting complaints that peoples IC Piping was cracking on the Sway Bar and therefore BL revised there piping and fabricated new parts.**

I was told by BL to stay AWAY from the Sway Bar.

So who has a FMIC from BoostLogic and do you have any Install Pics or hints on what to do?????

Here are my Pics:
The 3-Pipes to be fitted on the Driver Side IC! U-Shape fits directly on IC. Small Elbow on the left connects to turbo housing! Middle Pipe is giving me huge problems!

U-Shaped Pipe Connecting on the Driver Side IC.


U-SHAPE PIPE COMING FROM IC IN BETWEEN SWAY BAR AND RADIATOR.

MIDDLE PIPE SITTING INFRONT OF SWAY BAR RESTING ON RADIATOR THIS IS GIVING ME PROBLEMS! IS THIS RIGHT??


ELBOW PIECE ON TURBO



Some help would be great

Originally Posted by Mortal300

New TURBO PICS ON 4th PAGE!





[/B]

Originally Posted by 1sxyrxy

just get a ebay kit and start cutting, thats what i did... twice.

Originally Posted by 1sxyrxy

Originally Posted by IonFeright

No interference with the bumper at all, just had to ziptie some hoses out of the way.

Originally Posted by IonFeright

I tucked mine about 3/4" behind the crash bar

Originally Posted by lemmiewink

Here is a youtube link of my first start up without the bumper. Near the end you can somewhat see where the piping dissappears to. This is a supra intercooler piping kit.
http://www.youtube.com/watch?v=cEw1UzeyoPU

There is actually a precut hole there for the stock piping.

Here is a pic of my engine bay pic. I know its a pretty horrible picture but it shows the initial direction of the piping at least.



If you look carefully you can see a hole that I erroneously cut due to thinking the piping would have to go through it.

Originally Posted by OneJay

Here is mine. I just punched a hole through the frame and used a 70º bend to get it through there.

Originally Posted by FiSta

i just went straight down...

Originally Posted by BattleVer

Also started on the hot pipe. For more room I cut the outlet on the turbo and welded on a new end.

Originally Posted by BattleVer

Picked up some tubing this morning and got to work again. Made the intake pipes and had the windows put back in. The windshield was cracked before we took it out so needed a new one.



Then got to work on the hot side. Starts off as 2.75" and switches by the sway bar to 3" and goes into the intercooler.





Comes out the intercooler as 3.5" and then goes to 4" at the TB.

Originally Posted by SC300TT!