View Poll Results: What's Under Your Hood???
Voters: 221. You may not vote on this poll
What's Under Your Hood?
12-28-09, 06:13 PM
#65
I'm in the middle of my swap. The engine bay is painted anthracite, it will be completely clean as in the picture. It was my first time painting and polishing but it has come out nicely. The spark plug cover will be painted black shortly.
I've deleted the ABS and cruise control. The battery and fuse box are relocated out of the engine bay.
My engine consist of a 2JZ-GTE with precision 76MM turbo, 272 cams/valve springs, 4" downpipe, 1000cc injectors/E85 setup, painted accessories with billet pulleys, and other polished parts. I replaced the water pump, oil pump, crank pulley, valve seals, FMS, RMS, and other misc seals.
The engine will be mated to a V161 with 6spd JDM diff and 6spd driveshaft. I should be dropping it in shortly.
I'm shooting for 800+ RWHP.
I've deleted the ABS and cruise control. The battery and fuse box are relocated out of the engine bay.
My engine consist of a 2JZ-GTE with precision 76MM turbo, 272 cams/valve springs, 4" downpipe, 1000cc injectors/E85 setup, painted accessories with billet pulleys, and other polished parts. I replaced the water pump, oil pump, crank pulley, valve seals, FMS, RMS, and other misc seals.
The engine will be mated to a V161 with 6spd JDM diff and 6spd driveshaft. I should be dropping it in shortly.
I'm shooting for 800+ RWHP.
Last edited by fried_rice; 12-30-09 at 04:23 PM.
02-13-10, 06:18 AM
#67
JDM Mark IV Supra 2JZ-GTE/V160 -Garrett GTX4202R Billet/Carillo H beam rods/ CP pistons/Full race T4 manifold/Hypertune intake w/102mm throttle body/Full Ferrea head w/+1 valves//Titan 272 High Lift cams/ID2000cc injectors/triple Bosch 044's/RPS Triple C/C clutch/Greddy 4 row/Fluidyne radiator/ProEFI ECU w/flex Fuel - 1012 rwhp and 782 lb-ft @36psi boost
Last edited by TeeLex; 03-28-11 at 10:43 AM.
PTB76 powered. Cool thread....glad it got brought back
1UZ power!!!
