Vacuum help!
#1
Driver School Candidate
Thread Starter
Join Date: May 2021
Location: FL
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Vacuum help!
So I recently replaced injectors and I can’t quite figure out the correct way to get some of the vacuum lines back on. Photos would be a great help.
#2
Why not go to a Lexus dealership and take a look at a new one on the lot?
Seriously, it would help if you told us if you had a 300 or a 400 and what year.
Seriously, it would help if you told us if you had a 300 or a 400 and what year.
#3
Driver School Candidate
Thread Starter
Join Date: May 2021
Location: FL
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
#4
Just saw this. If it isn't raining tomorrow I'll go look on my bone stock 1993 SC300 and see if I can get you some photos.
#5
Okay, here is a link to some photos I took. I hope this helps. If you still have trouble, I also have the Lexus shop manuals and I can scan or get photos of that as well.
https://imgur.com/a/Jhsk4FP
https://imgur.com/a/Jhsk4FP
The following users liked this post:
Duck05 (05-22-21)
Thread
Thread Starter
Forum
Replies
Last Post
4pointslow
IS - 1st Gen (2001-2005)
7
01-31-15 04:07 PM