Not Another SC300 GTE Transformation
05-02-08, 02:25 AM
#1
Rookie
Thread Starter
Join Date: Jan 2008
Location: Co
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Not Another SC300 GTE Transformation
I have mostly been on here just selling parts. Well time to post pictures of where the parts came from.
Bought the car Back on jan 15th as a blown motor, uncared for car!
Then 20k and 4 months later i have a 2jzgte 6spd with 3.26 trd rear, supra brakes, supra roll bars, its80mm turbo, 96lb injectors, hks typer cooler, custom ic pipes and 4" turbo back exhaust(exit on the right
)
Its running now but still working out the bugs and need to finish up the detail before really good photos come out when i get those bugs all fixed. I have to thank Dr Tweak from pheonix tuning for the harness conversion, jacks transmissions in colorado springs for the ic pipes and exhaust fab work. All other work was performed by myself at night and long hours.
Bought the car Back on jan 15th as a blown motor, uncared for car!
Then 20k and 4 months later i have a 2jzgte 6spd with 3.26 trd rear, supra brakes, supra roll bars, its80mm turbo, 96lb injectors, hks typer cooler, custom ic pipes and 4" turbo back exhaust(exit on the right
)Its running now but still working out the bugs and need to finish up the detail before really good photos come out when i get those bugs all fixed. I have to thank Dr Tweak from pheonix tuning for the harness conversion, jacks transmissions in colorado springs for the ic pipes and exhaust fab work. All other work was performed by myself at night and long hours.
05-04-08, 01:22 AM
#6
Lead Lap
iTrader: (2)
Join Date: Aug 2004
Location: Oregon
Posts: 550
Likes: 0
Received 0 Likes
on
0 Posts
Looks amazing!!!
I wish we had a single shop/person here in Oregon that could do a swap for me that actually KNOWS what they are doing....
I'll ship my car to you next week!
I wish we had a single shop/person here in Oregon that could do a swap for me that actually KNOWS what they are doing....
I'll ship my car to you next week!
Trending Topics
05-06-08, 02:09 PM
#10
Rookie
Thread Starter
Join Date: Jan 2008
Location: Co
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Thanx Guys. its not orange its copper :/
I had to paint the cold side installed since it was such a tight fit it trashed the powder coat
Power shooting for up and above my previous supra which was 856hp at 6000ft. That was with a 76mm ITS.
I had to paint the cold side installed since it was such a tight fit it trashed the powder coat
Power shooting for up and above my previous supra which was 856hp at 6000ft. That was with a 76mm ITS.
I was wondering when I would see you on here. 
Post up some pics of your past rides..
05-06-08, 08:52 PM
#13
Lead Lap
Join Date: Feb 2002
Location: California
Posts: 774
Likes: 0
Received 0 Likes
on
0 Posts
