nice work man. the cams look pretty good still, how many miles are on it.

 

Couple thousand. I cant wait to get my t61 installed, im so bored with this garrett turbo... lol.

 

Came home to some presents

 

Got the T61 installed today. I must say it spools a lot sooner than my garret and the sound of it winding down is pricless Also got some more stuff in the mail:

 

What mufflers are those? Inlet/outlet size? Straight through or baffled?

Thanks,
-scott

 

So at this point how are you tuning? Still using the SAFC? Have the dec air settings been working for you? Hows the stalling situation?

I was doing some research on how to set up the dec air... according to what I read it should be setup like this:

Throttle: 1%
NE1: 3
NE2: 4

You can lower NE1 until it stops stalling out once lowered +1 to it and thats your NE2 value.

So if your still running it try that. If not ill post results once I try it out.

 

http://www.magnaflow.com/02product/s...ne=main&id=618

 

Im still only using the SAFC, im installing my vpc tomorrow. The stalling situation is still there especially now that i got my tial bov working awesome. Ill try those settings now and post my results at around 3pm central time today.

 

Thanks, but the link doesn't say if they're straight through unless "reversable" implies that.

If you look in one end, can you tell if it's diagonally connected to the other end with a perforated tube?

Thanks,
-scott

 

Yes its one tube thats bent on the inside.

 

Today was an awesome day, got my exhaust work done and got my vpc installed. For the exhaust i got a 3" mandrel bent midpipe to 2 2.5" tail pipes to the magnaflow mufflers with the 4" tips.

Heres some pics and vid:



T61:


Vid:
http://www.youtube.com/watch?v=-z5s3xMMb3E

 

@6psi

271whp 269ft-lbs