Performance & Maintenance Engine, forced induction, intakes, exhausts, torque converters, transmissions, etc.

just put a 1.3 head gasket on, quick question

Thread Tools
 
Search this Thread
 
Old 06-28-07, 05:42 PM
  #1  
trent123
Driver School Candidate
Thread Starter
 
trent123's Avatar
 
Join Date: Jun 2007
Location: florida
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Default just put a 1.3 head gasket on, quick question

Hey i put the 1.3mm head gasket on and now when i drive the car it feels a little rough at idle and in first gear if i let the car slow down by downshifting there is more popping coming from the exhaust.

right now the car is still stock, is the car running rich? or any ideas? my friend recommended putting 89 gas in (currently using 93 octane) to fix it but i dont know much about this stuff.

any help is appreciated thanks
Old 06-28-07, 07:46 PM
  #2  
booja
Lead Lap
iTrader: (1)
 
booja's Avatar
 
Join Date: Jun 2006
Location: texas
Posts: 677
Likes: 0
Received 1 Like on 1 Post
Default

more than likely since you lowered your compression and there is no forced induction im sure its running rich
Old 06-28-07, 09:09 PM
  #3  
trent123
Driver School Candidate
Thread Starter
 
trent123's Avatar
 
Join Date: Jun 2007
Location: florida
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Default

yea its from the xspower gasket kit... should i run a lower octane until i turbo to make it run right? or is there nothing i can do unless i tune the car for this gasket? boost is comming but in about 2 months
Old 06-28-07, 11:30 PM
  #4  
andrewwake
Lead Lap
iTrader: (1)
 
andrewwake's Avatar
 
Join Date: Mar 2007
Location: 916 Ca
Posts: 773
Received 4 Likes on 4 Posts
Default

there's not too much you can do right now except just sit tight and wait for the FI to come.
Old 07-21-07, 09:19 PM
  #5  
98mkiv
Rookie
iTrader: (1)
 
98mkiv's Avatar
 
Join Date: Jul 2005
Location: NH
Posts: 62
Likes: 0
Received 0 Likes on 0 Posts
Default

check your timing. Other than that it should be running fine, even with lower compression, maybe a little rough, but not very much.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
troner
Performance & Maintenance
16
11-04-12 09:44 AM
puff
Performance
3
03-24-10 02:53 AM
TecnoSmurf
Performance & Maintenance
6
04-12-08 06:36 AM
southernsc
Performance & Maintenance
3
01-07-04 01:36 PM



Quick Reply: just put a 1.3 head gasket on, quick question



All times are GMT -7. The time now is 02:26 PM.