Anyone ever have their heatercore changed..?
I need to do mine soon luckily Az doesnt get that cold...
but Ive done one on my Mustang, 8 hours later...it was done. Just for fun I looked up the time called for in the service manuels shops use to quote prices on Labor, its calling for 19 hours..!!!! that = to about $2,000 if you where to have the dealer do it just in labor ! Anyway......wish me luck, Im sure I can do it in a day. Anyone have any tips? |
I have the same problem (i think?!). I turned it to hot, then push auto the fan don't come on. But when i manully turn on the fan, only the cold air comes out. You should try topping of your coolant, this can be the cause of your heater.
|
Also maybe the heater control valve, located in the engine compartment near the fire wall, passenger side. Do a search.
|
thats a 2 day weekend job, complete dash has to come out!!
|
ajayssc40093, is there a way to fix the control valve? Or i have to change the whole thing? And do you know where i can get one for a good price? Thank You!!
|
Before you guys get yourselves into too much debt just go and check the fluid level in your radiator. If you don’t have enough fluid in the radiator it bypasses the heater core and just gives the water to the vital engine parts, So just take a moment and check the water level, there is a good chance that the water level is just too low and that is why your not getting hot air to the heater.
Tommy |
Originally posted by ajayssc40093 Also maybe the heater control valve, located in the engine compartment near the fire wall, passenger side. Do a search. thats most likely what it is...i had the same problem 2 years ago.. CEO |
All times are GMT -7. The time now is 01:49 PM. |
© 2024 MH Sub I, LLC dba Internet Brands