Performance & Maintenance Engine, forced induction, intakes, exhausts, torque converters, transmissions, etc.

Pricing on swaps?

Thread Tools
 
Search this Thread
 
Old 04-14-07, 11:16 PM
  #1  
FormosaSC
Lexus Champion
Thread Starter
 
FormosaSC's Avatar
 
Join Date: Jun 2005
Location: Where my car's at
Posts: 2,129
Likes: 0
Received 1 Like on 1 Post
Default Pricing on swaps?

First of all i have searched the topics, there alot of information on how much the parts for the swaps go for, such as front clips or engine from Jhot and other engine sources, but not alot for how much it acually cost to install.

ive read on the forum that a 2jz-gte will cost around 10000$ to have a 2jz 6-speed swaped in a sc300, but i was wondering how much it will cost to install the engine alone since some of us already have a w58? i know the w58 will not hold power over 400hp, but if i just want to run stock 320hp, i wouldnt need to worry, and even if i make over 400, a r154 is always an alternative.

also, how much does it usually go for to swap a 1jz vvt-i and or a non-vvti engine in a sc300? again this is with the stock w58.

Just out of curiosity, i know for the 1jz, you can have everything functional as stock, but how about a 2jz?
Old 04-14-07, 11:53 PM
  #2  
SCoupe
Lexus Test Driver

 
SCoupe's Avatar
 
Join Date: Aug 2003
Location: California
Posts: 887
Likes: 0
Received 0 Likes on 0 Posts
Default

Truth: No one in their right mind goes through a swap and leaves things at eom 320 crank output.

Truth: W58 is capable of handling 400whp with out blowing up. 15 months and counting.
Old 04-15-07, 06:53 AM
  #3  
Blizzy
Lexus Champion
iTrader: (-1)
 
Blizzy's Avatar
 
Join Date: Nov 2006
Location: IN
Posts: 1,914
Likes: 0
Received 2 Likes on 2 Posts
Default

Originally Posted by SCoupe
Truth: No one in their right mind goes through a swap and leaves things at eom 320 crank output.

Truth: W58 is capable of handling 400whp with out blowing up. 15 months and counting.
After spending thousands on the swap, you are absolutely going to spend hundreds of dollars here and there to up the boost and put more power down.

If you only want 320bhp, put a turbo on your stock engine: save yourself the dough and the trouble.
Old 04-15-07, 09:59 AM
  #4  
FormosaSC
Lexus Champion
Thread Starter
 
FormosaSC's Avatar
 
Join Date: Jun 2005
Location: Where my car's at
Posts: 2,129
Likes: 0
Received 1 Like on 1 Post
Default

well that doesnt answer my question, i will eventually go up in HP, but all im saying is i think getrag is overkill for the power i want to make, 500 hp is really enough for me already, if people think you HAVE to have 600 or more hp or else you wont be satisfied then i dont knwo what to say, 500 is a mark for me, and ill get a r154 for that later on, right now i want an engine swap more, and i dont want to be stoped just because i cant afford the transmission at the time.

reason why i want do the swap more is because i hae the money now, and if i dont do it now, i know the money will go into stupid stuff such as bodykit, wheels and such.

Please help and let me know how much it would cost to install a 2jz or 1jz vvti engine without the tranny. thanks
Old 04-16-07, 04:58 AM
  #5  
Blizzy
Lexus Champion
iTrader: (-1)
 
Blizzy's Avatar
 
Join Date: Nov 2006
Location: IN
Posts: 1,914
Likes: 0
Received 2 Likes on 2 Posts
Default

Originally Posted by s14maniac
well that doesnt answer my question, i will eventually go up in HP, but all im saying is i think getrag is overkill for the power i want to make, 500 hp is really enough for me already, if people think you HAVE to have 600 or more hp or else you wont be satisfied then i dont knwo what to say, 500 is a mark for me, and ill get a r154 for that later on, right now i want an engine swap more, and i dont want to be stoped just because i cant afford the transmission at the time.

reason why i want do the swap more is because i hae the money now, and if i dont do it now, i know the money will go into stupid stuff such as bodykit, wheels and such.

Please help and let me know how much it would cost to install a 2jz or 1jz vvti engine without the tranny. thanks
No one said you will be unsatisfied with 500hp. We simply said that once you get 320hp from an engine that can add horsepower with relative ease, you are going to do so.

I would have no idea what a swap is going to run you. When I think about stuff like this, I assume that I am going to be doing the labor myself over a few months of a weekends. I would bet a shop would charge you thousands in labor alone.

If I had your current goals (maximizing hp with the stock tranny), I would run an na-t set up by slapping a turbo on your stock engine. Many SC and Supra guys are running this exact set up with 350-400hp at the wheels (400-450 at the crank). With the money you saved from having to do the full swap, you could buy your wheels or your body kit.
Old 04-16-07, 09:19 AM
  #6  
vwynn
Lexus Fanatic
iTrader: (4)
 
vwynn's Avatar
 
Join Date: Feb 2007
Location: CA
Posts: 5,945
Received 53 Likes on 36 Posts
Default

ive read on supra pages.. stock supra TT parts can hold 700-800 HP (stock internals) for a quite a bit of time..

if you where to do the motor + tranny swap would you still be able to do what the supra does? or the drive shaft and other parts would need to be changed?
Old 04-16-07, 11:28 AM
  #7  
cino78h
Driver
 
cino78h's Avatar
 
Join Date: Sep 2006
Location: FL
Posts: 156
Likes: 0
Received 0 Likes on 0 Posts
Default

if you do an 2j gte swapped you should be able to invested an extra $600-$1k on an nice tranny(r154). and kept its BPU...tuneing, ecu and fuel mangerment is where its put an hole in everyone pocket!
Old 04-17-07, 04:54 PM
  #8  
FormosaSC
Lexus Champion
Thread Starter
 
FormosaSC's Avatar
 
Join Date: Jun 2005
Location: Where my car's at
Posts: 2,129
Likes: 0
Received 1 Like on 1 Post
Default

no numbers yet..
Old 04-17-07, 05:36 PM
  #9  
Psionic
Lead Lap
 
Psionic's Avatar
 
Join Date: Sep 2005
Location: TX
Posts: 456
Likes: 0
Received 0 Likes on 0 Posts
Default

Your stock 2jz-ge will handle just as much hp as a 2jz-gte, so there is no need to swap.
Old 04-17-07, 07:28 PM
  #10  
hemogoblin
Lexus Test Driver
 
hemogoblin's Avatar
 
Join Date: Mar 2003
Location: Los Angeles
Posts: 820
Likes: 0
Received 0 Likes on 0 Posts
Default

My 2JZGTE swap is around the 6-9K mark. Not including the v160.
Old 04-17-07, 08:56 PM
  #11  
jacobzking
Lead Lap
 
jacobzking's Avatar
 
Join Date: May 2003
Location: Texas
Posts: 534
Likes: 0
Received 0 Likes on 0 Posts
Default

I can get a 2jzgte installed (parts and labor) tomorrow for under $4,000 and be driving it 48-72 hours later.
Old 04-18-07, 09:30 AM
  #12  
FormosaSC
Lexus Champion
Thread Starter
 
FormosaSC's Avatar
 
Join Date: Jun 2005
Location: Where my car's at
Posts: 2,129
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by hemogoblin
My 2JZGTE swap is around the 6-9K mark. Not including the v160.
holy moly... i can get a 2jz with getrac tanny for 9k swaped in,
Old 04-18-07, 12:21 PM
  #13  
Psionic
Lead Lap
 
Psionic's Avatar
 
Join Date: Sep 2005
Location: TX
Posts: 456
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by bassmagass
Isn't there a couple turbo companies that make turbo kits for a GE that don't make as much hp for the same amount of money as other turbo companies for GTE??? So if he would ever want more hp, it would be less amount of work if he just swapped a GTE, he wouldn't have to get custom parts for a big turbo...I think swapping a 1j or 2j will be mare raliable too because they have oil squirters....1j would be way cheaper to swap then a 2j...a soarers front clip go for about $2000-2300 that's what im planning to do but still haven't found a clean front clip...its worth buying a clip because it comes with everything u need and u dont have to be worrying about missing parts
Fallguy ran 9 sec @153 on his stock GE engine (upgraded headgasket). He was running 35lbs of boost and a 75shot of spray most of the season (I think his engine had over 200,000 miles on it too). He was just running a bolt-on kit from DaveH. Believe me, you can get one HELL of a turbo kit for the $6000-9000 you would spend to swap a gte engine in.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
DoomLight
SC400 / 300 Classifieds
6
08-05-11 05:38 PM
craaaazzy
Performance & Maintenance
92
03-24-11 06:13 AM
JDMfoLIFE
Performance & Maintenance
6
10-07-08 11:55 PM
SCjzz
Performance & Maintenance
3
08-21-08 03:19 PM
FormosaSC
Performance & Maintenance
7
04-11-07 08:16 AM



Quick Reply: Pricing on swaps?



All times are GMT -7. The time now is 09:48 AM.