V8A31

I want my car to add turbo,the engine is 1UZFE,who tell me the E-manage or HKS F-CON can modify the stock ECU?

insomniac

i heard they dont have turbo for the sc400 yet. i could be wrong

V8A31

my is nissan a31,now swap the engine from the RB20 to 1UZFE,now want to add the turbo,so help me to modify the ECU,thanks

sliva001

MAP ECU
http://www.mapecu.co.nz/map2.html

bens sc

iTrader: (2)

why cant you use the universal aem standalone? it might take a while to figure out how to wire it up, but it would be the best for tuning purposes imo.
i have had great luck with it, just a thought.

V8A31

HI,BENS SC,I dont know what is the universal aem standalone,I am a Chinese,the english is poor,so can you explain it again? thanks a lot!

morris

iTrader: (2)

Neither of these is proven to work with the 1uz-fe.

AEM is a standalone computer http://www.aempower.com/ I am told that it can be made to work but I dont know anyone that has actually done it.

many people use an SAFC2 piggyback computer for turbo 1uz SAFC is by apexi. www.apexi.com

Haltech standalone computer has been proven to work as well

StiCk3

iTrader: (5)

Check www.lextreme.comi think there might be a few who have succeeded with the AEM for a Supra. if not check the other ECUs the members use (Motec, adaptronic, etc.)

DIrEctQL

Yes, you can re-wire an AEM EMS to work with the 1UZ. A local guy who posts on lextreme.com did it.

morris

iTrader: (2)

I have no doubt that it can be made to work iwth the 1uz, I guess the question is how easy or hard is it compared to a haltech or some other system that is widely used with the 1uz and VVTI if needed.

PS supras are not 1uz.

morris

iTrader: (2)

Easy or hard also translates into what will it cost and the amount of downtime requried.

DriftGirl

iTrader: (6)

Try UNI CHIP

StiCk3

iTrader: (5)

found good thread on this

http://lextreme.com/forums/showthread.php?t=3617

PS AEM supra apps can work with 1UZ if the motor is non-vvti and the ECU is for an NA supra