jburghardt

i have a 95 sc300 and i was planning on doing a seafoam treatment, but i have no idea where the pcv hose is. If someone could show me a picture of where it is, i would greatly appreciate it.

blknfury

its one of the thick hoses on your valve cover

Turbocoop

I just used a little vacumn hose coming off near the FPR, just use any hose going into the IM

sc250tt

disconnect the booster hose from the brake booster and pour away

Project300

I would find the vacuum tube on the intake nearest the head and use that. The brake booster is a nice big banjo fitting that would work well and is easy to access. I was thinking of doing a Seafoam session too, but what makes you want to do one? For me, I just failed the local emissions test for NOx and one of the problems could be the EGR or carbon buildup in the engine or O2 sensors among other things. I'm just gathering info before I go out in 0 degreee weather to get the SC to pass.

PM me if you need good photos. I've got some.

jburghardt

I'm doing the seafoam treatment because i'm about to hit the 200,000 mile mark on the car and i don't believe it has ever been done. I hope to see some good results. I've heard nice things about seafoam and i'm hoping the car will feel like new

NYCsc300

i have a can and still havent done it yet..confused about how much and were to put it... or maybe cus i've been lazy

jburghardt

I have read most of the posts about seafoam and everyone seems to have their own opinion on where it is supposed to go and what to do. I'm just going to pick my favorite and run with it.