kevro

iTrader: (2)

ok so i got the car yesterday (5speed 92 sc300) it was pinging and running warrm so I brought it home and swapped the thermostat (lower temp) and inspected the timing to find that the distributer was loose and the timing was ever-changing. so I set it in the middle figuring i would tune it seat of the pants until i can swing by my buddies shop. start it up and i runs like ****. loosen distrib and move it back and forth no change, rnning on 5 cyl. pull plug wires until no effect, number 2 has no effect at all on th way the car runs. today,pulled intake mani, replaced all plugs(ngk iridium) and wires and cap and rotor. start up, still running like ****. move distributer back and forth, still no effect. running on 5 still, pull wires one at a time, this time its number 5, when i pull it there is no change in the way the car runs. what is going on here, I have wanted this baby for a whlle and i havent had one nice drive in it yet.
p.s. searching doesnt do **** for me, I spent like three hours trying to find a good description of the timing mark alignment and all I found was people telling others to "do a search"

kevro

iTrader: (2)

bump-help?

kevro

iTrader: (2)

bump- has anyone ever had a fuel injector go from working fine (by all accounts) to working poorly enough to cause a miss through all rpm's

kevro

iTrader: (2)

ok, ive got compression in the number 5 cyl, ive got spark in the no 5 cylinnnder, pulled the injector from no. 5 and I can blow through it, seems like it should be shooting ful, checked for pulse at injector, its good. hos am I not gettting an explosion in number when ive got fuel, spark, and compression??

breed

any updates??