Turbo guys only, pix of exhuast beneath the SC
#1
Lexus Test Driver
Thread Starter
Join Date: Aug 2003
Location: California
Posts: 887
Likes: 0
Received 0 Likes
on
0 Posts
Turbo guys only, pix of exhuast beneath the SC
I can't seem to find a thread with exhuast pictures from SC-turbo set up. I'm looking for 3" or 2-1/2" only. (Please nothing from the SC400 V-8)
I've never heard of anyone going about it this way....., currently have a 3" RMM hi-flow cat downpipe and I'm thinking about using one 3" inlet 3"outlet magnaflow under the car just after where the midpipe would be and splitting it off into dual runs of 2-1/2" Stainless Steel pipes out the back with SS tips, no mufflers in the back. Why, well, less backpressure (one muffler), less weight (one muffler saved), less clutter, less expensive and hopefully looks cool, but cosmetics not the driver hear..
Informed comments from those who have done most welcomed.
I've never heard of anyone going about it this way....., currently have a 3" RMM hi-flow cat downpipe and I'm thinking about using one 3" inlet 3"outlet magnaflow under the car just after where the midpipe would be and splitting it off into dual runs of 2-1/2" Stainless Steel pipes out the back with SS tips, no mufflers in the back. Why, well, less backpressure (one muffler), less weight (one muffler saved), less clutter, less expensive and hopefully looks cool, but cosmetics not the driver hear..
Informed comments from those who have done most welcomed.
#2
Lexus Test Driver
here you go bro. 3" piping all the way through starting from downpipe that connects to a Magnaflow 3" Hi-flow cat and splits to dual 3" piping and HKS mufflers:
#4
Moving SC Threads
iTrader: (14)
i'm picture attatchment inept. this is in the gallery, upload to this thread if you like.
https://www.clublexus.com/gallery/sh...0/ppuser/13123
if your turbo the 'y' section needs to be a 'y' not a 't' for flow reasons.
a brief write up here:
https://www.clublexus.com/forums/sho...d.php?t=174878
good luck w/ everything
john
https://www.clublexus.com/gallery/sh...0/ppuser/13123
if your turbo the 'y' section needs to be a 'y' not a 't' for flow reasons.
a brief write up here:
https://www.clublexus.com/forums/sho...d.php?t=174878
good luck w/ everything
john
#5
Lexus Test Driver
Thread Starter
Join Date: Aug 2003
Location: California
Posts: 887
Likes: 0
Received 0 Likes
on
0 Posts
Ask and you shall receive
Kaotiq and supra dr,
That's exactly what I was looking for. Thank you. I might put one 3" in/out Magnaflow in the middle, add the 'Y" pipe and run twin S.S. 2-1/2" out the oem location and reuse the oem tips. Stealth exhaust. About the 4" dp, it rocks,
That's exactly what I was looking for. Thank you. I might put one 3" in/out Magnaflow in the middle, add the 'Y" pipe and run twin S.S. 2-1/2" out the oem location and reuse the oem tips. Stealth exhaust. About the 4" dp, it rocks,
Thread
Thread Starter
Forum
Replies
Last Post
ls400916
LS - 1st and 2nd Gen (1990-2000)
77
01-16-15 06:23 AM