SC getting turbo
#1
Lead Lap
Thread Starter
Join Date: Nov 2004
Location: California
Posts: 407
Likes: 0
Received 0 Likes
on
0 Posts
SC getting turbo
My sc is in the shop to get paint right now. while its getting paint i try to get all the turbo parts ready for it. Here is what i got so fat please tell me what you think and if you can get better deal than this please let me know. I got a custom turbo manifold with wastegate, and downpipe for $750 ship from East Coast. This can hold up to 600hp and not going to crack easily. I'm thinking about getting T4 or something bigger but haven't find any good one yet.
#3
Lead Lap
Thread Starter
Join Date: Nov 2004
Location: California
Posts: 407
Likes: 0
Received 0 Likes
on
0 Posts
Thanks morris this is Sc300 stick. I just try to get everything together right now. So far i have the manifold, wastegate, and downpipe. I'm still searching around for injector and other stuff. My budget is 3k so i try to get the cheapest that i could. I try to push out 400hp to drift with it. I just checked out your gs4 set up earlier that was crazy man. if you could help me out with some parts
#4
Driver
iTrader: (7)
Join Date: Apr 2005
Location: Tx
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Gs L-tune
My sc is in the shop to get paint right now. while its getting paint i try to get all the turbo parts ready for it. Here is what i got so fat please tell me what you think and if you can get better deal than this please let me know. I got a custom turbo manifold with wastegate, and downpipe for $750 ship from East Coast. This can hold up to 600hp and not going to crack easily. I'm thinking about getting T4 or something bigger but haven't find any good one yet.
#5
Lexus Champion
iTrader: (2)
Join Date: May 2004
Location: Tennesee
Posts: 3,465
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Gs L-tune
Thanks morris this is Sc300 stick. I just try to get everything together right now. So far i have the manifold, wastegate, and downpipe. I'm still searching around for injector and other stuff. My budget is 3k so i try to get the cheapest that i could. I try to push out 400hp to drift with it. I just checked out your gs4 set up earlier that was crazy man. if you could help me out with some parts
I've got a GS400 and all parts were custom for the most part so there are no leftovers or interchangeble items. I may have SAFC2 in a month though.
#6
Lexus Fanatic
iTrader: (1)
If you're looking to save money on a turbo, the T61s going on ebay are good units... they can make great power (600rwhp+ at 28psi or so)... not that you'd be boosting that much but 500whp is available at lower boost levels
you still need to decide on injectors, fuel control, etc...
to save money, i'd try high impedance RX-7 T2 550cc injectors, an LS400 MAF, a wideband O2 sensor and a SAFC-2... retard the ignition about 3-4 degrees and get it tuned
you still need to decide on injectors, fuel control, etc...
to save money, i'd try high impedance RX-7 T2 550cc injectors, an LS400 MAF, a wideband O2 sensor and a SAFC-2... retard the ignition about 3-4 degrees and get it tuned
Trending Topics
#8
Lead Lap
Thread Starter
Join Date: Nov 2004
Location: California
Posts: 407
Likes: 0
Received 0 Likes
on
0 Posts
haha yea TRD was rite LSD is wat i'm gonna get next but hard to get it so i just jump on the turbo set up for now i'm gonna get 550cc. I just got a good deal on that so yea
#9
Lexus Test Driver
iTrader: (7)
Join Date: Dec 2004
Location: Classified
Posts: 1,469
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Bean
If you're looking to save money on a turbo, the T61s going on ebay are good units... they can make great power (600rwhp+ at 28psi or so)... not that you'd be boosting that much but 500whp is available at lower boost levels
#10
Pole Position
Join Date: Feb 2004
Location: International
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Idrewfelix
The supra boys claim that the XS turbos are trash and they break within 2 months. Do you have any experience with them or someone that does?
Correct me if I am wrong but I belive I heard the XS blowers are made in China ? If so I would be concerned with quality.
#11
Lexus Fanatic
iTrader: (1)
Originally Posted by Gamer
Correct me if I am wrong but I belive I heard the XS blowers are made in China ? If so I would be concerned with quality.
I've also heard trouble with XS-power stuff; but then again I've seen a lot of good reviews on their more recent turbo manifolds... and yes THOSE are made in China.
Thread
Thread Starter
Forum
Replies
Last Post
lex1997
SC- 1st Gen (1992-2000)
12
06-03-05 04:00 PM