Description:

Not a vehicle part-out, just some parts I am selling from my 1993 SC300's original 2JZ-GE engine after my GTE swap that was completed late last year.

None of these parts are from 2016 Audi A3 Sportback E-Tron. I listed everything as parts from my 1993 Lexus SC300's engine plus some related aftermarket parts. I am at a loss for how my original listing of my '93 SC300 parts became categorized as a '16 A3 E-Tron. I cannot change the category at this point. Apologies for any confusion.

The engine's bottom end has already been sold. The complete GE cylinder head with valve covers, original cams and distributor are not yet listed in this ad but they are available as well.

My SC300 is an original California Emissions model 5-speed so a good number of the parts listed are very new following my last smog test in 2017 when just about everything emissions related had to be replaced. All of those parts, especially those directly emissions related, had very little mileage on them prior to my removing the engine for my GTE swap in 2018.

Prices for all items include shipping unless otherwise noted.


----------------------------------------
2JZ-GE Non-VVT-i and 92-97 SC300 Parts:
----------------------------------------

--2JZ-GE USED OEM Denso Starter from 1993 Lexus SC300 (older flat style connector) just rebuilt with OEM Toyota starter contact replacement kit -- $60.00 shipped

--2JZ-GE USED Lexus SC300 Air intake box and associated hard plastic pipes minus main rubber OEM hose (see above), all in excellent shape unmodified -- $20 + shipping

--2JZ-GE 1992-1997 Water Bypass Hose 16264-46041 OEM, Brand New In Bag -- $16.00 shipped

--2JZ-GE 92-97 OEM Ignition Coil, 7,435 miles since new, purchased and installed in 2017 and removed in 2018, perfect operation -- $35.00 shipped

--2JZ-GE 1992-1997 Mechanical Cooling Fan Blade, USED w/251k miles, good shape, one mild crack on one blade but structurally sound all around -- $60.00 shipped

-- 2JZ-GE 1992-1997 (from 1993 my Lexus SC300) OEM original igniter, used w/251k miles, never had an issue with it. Good working condition -- $20.00 shipped

--1993 Lexus SC300 2JZ-GE M/T CA-Emission Spec OEM Throttle Body, NA Throttle Cable, OEM good working NA Idle Air Control Valve, OEM Toyota/Lexus TPS Sensor w/low mileage in good working condition -- $60.00 shipped

--2JZ-GE Non-VVT-i Aisin Water Pump, brand new in box -- $90.00 shipped

--2JZ-GE Non-VVT-i Used Toyota OEM Water Pump from 8/2010, USED w/61,456 miles, good working condition with no leaks or issues at time of removal -- $40.00 shipped

--2JZ-GE Non-VVT-i Water Pump Thermostat Elbow -- $20.00 shipped

--2JZ-GE Non-VVT Koyo/OEM Idler Pulley 13505-46041 (61.5k miles on part, good working order w/good bearing) -- $30.00 shipped

--2JZ-GE Accessory Belt Tensioner 16620-OW026 (251k miles w/good bearing & pulley) -- $45.00 shipped

--2JZ-GE 1993 SC300 Upper Intake w/Evap VSV (good working condition) -- $30 + shipping

ALREADY SOLD:

--2JZ-GE USED Lexus SC300 1992-1997 OEM engine intake hose 17881-46080 (discontinued), bought new in 2016, 29k miles since new, excellent suppleness like new -- SOLD

--2JZ-GE USED Lexus SC300 OEM Engine Mount Insulator Shields (for use with OEM early SC300 engine mounts) -- GONE

--2JZ-GE USED Lexus SC300 OEM 1992-97 Karmann-Vortex MAF assembly, excellent working condition incl. good sensor -- SOLD

--2JZ-GE USED Denso 950-0109 OEM spec fuel pump, only 7,795 miles since new, installed new in 2016 pulled in 2018 -- SOLD

--2JZ-GE USED OEM Denso Reman 100-amp alternator (round plug type for early Lexus SC300), installed new in 2017 and removed in 2018 with only 4,843 miles -- SOLD

--2JZ-GE Non-VVT-i Water Pump Pulley USED --$14.20 USPS Priority -- SOLD

--2JZ-GE 1992-1994 OEM Denso 330cc Injectors sonic cleaned and re-balanced by Five-O Motorsports in 2015, OEM 92-94 Fuel Rail & mounting hardware, OEM FPR -- SOLD

--2JZ-GE 1992-1994 Non-VVT-i lower intake manifold (to cylinder head) -- SOLD

--2JZ-GE Lexus SC300 1992-1997 Idle Air Control Valve, Standard Motor Products AC425, used with 12,403 miles, installed in 2016 and removed in 2018, perfect working order -- SOLD

--2JZ-GE Non-VVT-i Water Pump Side Cooling Pipe -- SOLD


------------------------------------------
2JZ-GE Non-VVT-i Emission-Related Parts:
------------------------------------------

--2JZ-GE 92-97 EGR VSV 90910-12125 (discontinued), unknown mileage, good working condition (tested +12V solenoid function working, tested pressure holding and release function working) -- $30.00 shipped

--2JZ-GE 92-97 EGR VSV 90910-12125 (discontinued), like new with only 11,601 miles of use from brand new, purchased new from Toyota dealer in 2016 and removed in 2018 -- $50.00 shipped

--2JZ-GE 92-94(and 95?) OEM EGR temperature sensor 89412-24031 (discontinued part), 11,861 miles since new, purchased new in 2016 and removed in 2018, perfect operation -- $60.00 shipped

--2JZ-GE 1992-1997 OEM "Y" Intake manifold 17860-46040 (discontinued part), USED with 12,588 miles since new, bought new from Lexus in 2016. Free-flowing EGR passages with NO carbon buildup, passed CA smog testing with this intake with flying colors in 2016 and removed 2018 -- $60 shipped


ALREADY SOLD:

--2JZ-GE USED Lexus SC300 OEM / Standard Motor Products / Intermotor EGV867 (aka 25620-46020) 92-97 factory EGR valve, excellent working condition, used since new from 2016-2018 only to pass CA smog -- 11,599 miles on part -- SOLD

--2JZ-GE USED Lexus SC300 1993 OEM Charcoal Canister w/251k miles, excellent working condition, last passed CA smog testing in 2017 perfectly -- SOLD

--2JZ-GE USED Lexus SC300/MKIV NA/GS300 OEM EGR Valve for 92-97 Toyota P/N 25620-46061, NEW IN BAG NEVER OPENED, NEVER USED -- SOLD

--2JZ-GE USED Lexus SC300/MKIV NA/GS300 OEM EGR Valve, pulled in good working condition in 2016 at 251k miles, cleaned of carbon buildup in 2016, included with the NA/GE EGR pipe -- SOLD

--1992-1994 Lexus SC300 5-speed M/T California Emission ECU 89661-24322(84) -- SOLD

--2JZ-GE 92-94 Lexus SC300 OEM Denso O2 sensors (these versions have two wires each), only 11,236 miles since new, purchased new in 2016 and used until 2018. Will work in any 1992-1995 SC300 with Federal Emissions and any 1992-1994 SC300 with California Emissions -- SOLD

------------------------------------------
Aftermarket 2JZ/SC/R154 Aftermarket Parts:
------------------------------------------

--Prosport 0-5V 0-150 PSI Oil Pressure Sender P/N PSSMOPS (for use with Prosport harness P/N SMOPWH-PK), NEW unused. Installed briefly on my 2JZ-GTE engine during assembly but removed before the engine ever had oil in it -- $20.00 shipped

--R154 Toyota OEM Toyota Supra MKIII Turbo factory clutch disc and pressure plate, used with 12,504 miles in excellent shape. Installed new in 2016 when my SC300 still had its original bone-stock non-turbo 2JZ-GE engine bolted to my R154 transmission. It was removed in 2018 when the 2JZ-GE engine was removed. Zero wear issues at time of removal with plenty of life left (see pictures) -- $150 shipped


ALREADY SOLD:

--Driftmotion 1JZ-GTE VVT-i Drive-By-Wire Throttle Eliminator plate -- GONE

--R154 SouthBend Stage 2 "Daily" (copper-organic disc) clutch disc and pressure plate, only 1,600 miles, installed brand new and given a full 1,000 miles of grandma break-in but found it wasn't strong enough for my stock 2JZ-GTE if given full power/torque. No glazing, removed in good working order other than it just not being rated well enough for my application (see pictures) -- SOLD

-- Autoextrude SC300/400 (LHD type, will not fit Soarers) Ashtray dual gauge bezel w/LEFT DC Port. This configuration is currently out of stock or no longer available from AutoExtrude -- SOLD

--Autoextrude SC300/400 (LHD type, will not fit Soarers) Ashtray dual gauge bezel SYMMETRICAL layout w/ CENTER Dual USB Port -- SOLD