Rear suspension work on a 1992 LS400
08-23-18, 05:42 PM
#1
Driver School Candidate
Thread Starter
Join Date: May 2018
Location: CA
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Rear suspension work on a 1992 LS400
When replacing sway-bar links and torsion rods, etc. on the rear of a 1992 LEXUS LS400, is it better to have the vehicle on jackstands (with suspension parts hanging) or have the tires resting on a ramp? Which causes less tension as ypu remove patrs?
09-17-18, 11:57 PM
#2
With everything unloaded, no weight on suspension. On some things before tightening though they need to be loaded else the rubber bushings are over stressed. You need a shop manual for it. Online at the Toyota tech site.
Thread
Thread Starter
Forum
Replies
Last Post
MrsLS400
LS - 1st and 2nd Gen (1990-2000)
2
06-13-14 04:27 PM