installing a high beam assist mirror rx450
11-12-15, 10:38 AM
#1
Driver School Candidate
Thread Starter
installing a high beam assist mirror rx450
Greetings all from Greece
i have undertaken to install a high beam assist mirror on my 2010 rx 450h
the only extra wire needed according to the electronic diagram was a lin bus line from AFS pin 30 to mirror plug t5 pin 12.
however i cannot locate any diagnostic ecu for high beam assist on teckstream therefore cannot diagnose the system
Also do i need to reflash or change any other ecu ie Afs ecu can bus network ecu etc?
any input will help since this function and info is not available in our region
thx in advance
Ari
i have undertaken to install a high beam assist mirror on my 2010 rx 450h
the only extra wire needed according to the electronic diagram was a lin bus line from AFS pin 30 to mirror plug t5 pin 12.
however i cannot locate any diagnostic ecu for high beam assist on teckstream therefore cannot diagnose the system
Also do i need to reflash or change any other ecu ie Afs ecu can bus network ecu etc?
any input will help since this function and info is not available in our region
thx in advance
Ari
Thread
Thread Starter
Forum
Replies
Last Post
LexusWhy
IS - 2nd Gen (2006-2013)
1
12-07-17 12:17 PM