When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Anyone has a diy for lx570 for radar wiring. I just hardwired the valentinev1 in my gx and got the Uniden r7 for the lx. I have a 2018 looking for any info.
thanks in advance guys.
Anyone has a diy for lx570 for radar wiring. I just hardwired the valentinev1 in my gx and got the Uniden r7 for the lx. I have a 2018 looking for any info.
thanks in advance guys.
Anyone has a diy for lx570 for radar wiring. I just hardwired the valentinev1 in my gx and got the Uniden r7 for the lx. I have a 2018 looking for any info.
thanks in advance guys.
A lot depends on where you want to mount the Uniden. Assuming you're wiring 2 wires, white with a black stripe is always chassis ground. Red is normally on all the time, orange is on with ignition. A bit of probing the backs of connectors with a test light or dvm should get you started.
I installed them on the 2018 and 2015. For the 2015 there were two screws the hold the top console that are in the sun glasses area.
The 2018 was rather simpler, just push out the black box near the mirror away or downwards. It exposes the wiring, the wires were different colors but location was the same.
06-19-19, 02:38 PM
Mirror tap or hard wire radar from dome area
