Wheel guru's please chime in
i have been looking at wheels for awhile now, and read a lot from the above post wheel/tire info thread and want to make sure I'm understanding this all correctly. The more offset the more "tucked in fender" look correct? So a 21x9 with an ET24 offset front with 245/34/21 and 21x10 with an offset of ET40 with 285/30/21should fit with no fender mods correct? I have the 460l with the data controller also. For the rear I also know that there is a 21x10 with offset of Et24 but if I'm thinking about this correctly the Et24 offset would be more aggressive and with data controller on 3 in rear it would rub the fender, correct? This is part one of my question and I think it coyld answer my own question if I know the above first.
thank you, Whytry |
Use this offset calculator to compare: https://www.1010tires.com/Tools/Wheel-Offset-Calculator
|
Ok thanks, what is the factory's offset for these cars? |
Based on my more aggressive set up those wheels will fit. But the question is do the fronts have a high disk face to clear the factory BBK. You need (R disk) fronts. I’ve tossed out the data controller (trash) for coils. Couldn’t be happier. factory 19x8 +35 |
All times are GMT -7. The time now is 07:22 AM. |
© 2024 MH Sub I, LLC dba Internet Brands