Eyad

hello .. I am new here and I always reading from you guys and find a lot of helpful topics.

i have small problem with my LS460 2008 that when I lock the car either from remote or the button the driver side do the opposite .. like if I lock it will unlock and if I unlock it will lock .. only the driver side .. the other is ok .

so I contacted some one who sell actuator motor on eBay and he told me just switch the wires so they will work probably .

So so my question is do anybody send me the wiring diagram for the door lock wires ? Or guid me to where I can find the chart.

any suggestion we'll be appreciated ..

thank you you all in advance

Nospinzone

That makes no sense. If it was working fine, how did the wires get crossed? I would ask a dealer about it.

Eyad

The motor is for another models and to let it work on this model you need to reverse the wires

Nospinzone

So did someone change the motor for the door lock?

Eyad

the connector going in the whole door lock mechanism in the circle hole .. there is BLACK WIRE AND ANOTHER RED WIRE in the side bigger than other wires .. I just switched them and now works perfect