ClubLexus - Lexus Forum Discussion

ClubLexus - Lexus Forum Discussion (https://www.clublexus.com/forums/)
-   LS - 4th Gen (2007-2017) (https://www.clublexus.com/forums/ls-4th-gen-2007-2017-178/)
-   -   Naviskauto DVD 10.1 Inch install on a 2014 LS460 (https://www.clublexus.com/forums/ls-4th-gen-2007-2017/847584-naviskauto-dvd-10-1-inch-install-on-a-2014-ls460.html)

Natelw 02-18-17 08:06 AM

Naviskauto DVD 10.1 Inch install on a 2014 LS460
 
So guys and gals, I installed these into my LS the other day (one day after I got her). Although not quite OEM (wire going from unit to behind seat) I couldn't find another way to hide them, it otherwise turned out good. I found out the hard way that you DO NOT have remove the headrests. I am going to paint the wires with parchment paint (already ordered from Amazon) to better disguise them. If you have any questions, feel free to hit me up. I also posted this install on YouTube under my pseudonym (sorry it is a long video).
The units were about $130 or so each on Amazon. Not bad for an install under $300.https://cimg5.ibsrv.net/gimg/www.clu...7d16549bb1.jpg
https://cimg6.ibsrv.net/gimg/www.clu...8c0093c8df.jpg
https://cimg7.ibsrv.net/gimg/www.clu...1a30032b81.jpg
https://cimg8.ibsrv.net/gimg/www.clu...fd35e05d5e.jpg
https://cimg9.ibsrv.net/gimg/www.clu...3e7ace697b.jpg
https://cimg0.ibsrv.net/gimg/www.clu...ee07c02869.jpg
https://cimg1.ibsrv.net/gimg/www.clu...8866323333.jpg

xDe3JaYx 02-18-17 11:36 AM

I also installed some dvd screens a couple days ago. The wires go down the seat the same way as yours then I put the wires through the hole where the power seat wiring goes through after removing the seats. The wires went under the carpet to the center console behind the cigarette lighter plug then I wired it using t taps. Both screens are also hooked up to the stock dvd player.
https://cimg8.ibsrv.net/gimg/www.clu...21faf5e193.jpg
https://cimg0.ibsrv.net/gimg/www.clu...abec857e50.jpg

Natelw 02-18-17 01:33 PM

Nice!
 
That's a clean install. I don't have the patience and skill to wire it to the head unit (stock DVD player). I wish I could have. I'm planning on using these cheapo units for a bit then I will just put in a magnetized headrest mount for my kids' ipads and let them use bluetooth headphones or the bluetooth in the car to listen to audio. Looks good, very OEM and clean. BTW do you know how to get to the head unit on a 2013-up model? I would love to patch in for a hardwire that is connected to the battery and head unit DVD player. Right now it is plugged into a cigarette lighter adapter in the console so the kids have to turn on the player everytime we get in the car. Thanks for any insight.

Kuhan 02-18-17 04:00 PM

I went with a cheaper route, so I bought and connected the iPad for my kid. I used Document5 and downloaded videos for the kid to watch offline.

Natelw 02-18-17 08:31 PM

You know what Kuhan, that is a smart solution, especially with all the bluetooth headphones nowadays. As long as you remember the iPad for each trip it is a cheaper solution. I'll be doing the same once these crap out, I hope to get at least a year out of them or so first.

bigsherv 10-09-17 11:46 AM


Originally Posted by xDe3JaYx (Post 9775423)
I also installed some dvd screens a couple days ago. The wires go down the seat the same way as yours then I put the wires through the hole where the power seat wiring goes through after removing the seats. The wires went under the carpet to the center console behind the cigarette lighter plug then I wired it using t taps. Both screens are also hooked up to the stock dvd player.
https://cimg8.ibsrv.net/gimg/www.clu...21faf5e193.jpg
https://cimg0.ibsrv.net/gimg/www.clu...abec857e50.jpg

Did your wire run down the headrest pole or do you have an inch or so visible?

I saw this guy who had the mount come out of the part of the seat that pops off so you don't see any wires. Very different than the mount you both used.

Nice work by the way.

https://cimg8.ibsrv.net/gimg/www.clu...e4e0198601.jpgInstead of under the OEM head rest the mound comes up from right below the monitor.

Found another example of the mount I was referring to.


https://cimg4.ibsrv.net/gimg/www.clu...cda182636d.jpg

sha4000 10-10-17 08:52 AM

I guess you guys don't park on the street anywhere lol.


All times are GMT -7. The time now is 06:21 PM.


© 2024 MH Sub I, LLC dba Internet Brands