LS - 4th Gen (2007-2017) Discussion topics related to the current flagship models LS460, LS460L and LS600H

Driver Side Driveaxle / Axle Needs to Be Changed

Old 11-29-16, 11:57 PM
  #1  
C8V6C
Pole Position
Thread Starter
 
C8V6C's Avatar
 
Join Date: Aug 2010
Location: NV
Posts: 354
Likes: 0
Received 5 Likes on 4 Posts
Default Driver Side Driveaxle / Axle Needs to Be Changed

Another help thread!

My driver side driveaxle / axle needs to be changed...boot is ripped and it's making some harsh ride noise.

I've changed many an axle on other cars....and I've torn apart the entire front suspension on my 2008 LS600HL AWD Air Suspension already...

But is it as simple as taking apart everything from the hub, and popping it out from the transmission using a large prybar?

I plan to change out the gasket on the transmission during the install, and then towing the vehicle to Lexus for a full transmission flush, since I know the fluid will drain during the install.

Couldn't find any DIY or mention about this job on the forums. Any advice is appreciated
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Ericspyder
NX - 1st Gen (2015-2021)
20
04-06-18 04:37 AM
dreyfus
ES - 5th Gen (2007-2012)
24
09-02-17 11:10 PM
Blueshark
ES - 5th Gen (2007-2012)
2
10-25-13 02:59 PM
JUMBOTO
RX - 1st Gen (1999-2003)
11
06-27-13 11:35 PM
DplanDman8
ES - 1st to 4th Gen (1990-2006)
15
05-04-13 10:09 PM


Thread Tools
Search this Thread
Quick Reply: Driver Side Driveaxle / Axle Needs to Be Changed



All times are GMT -7. The time now is 05:50 AM.