Shocks, Springs, & Sway Bar

Reply Subscribe

Thread Tools

Search this Thread

04-28-17, 04:01 AM

#16

Ecohman

Driver

Thread Starter

Join Date: Nov 2016

Location: Georgia

Posts: 63

Likes: 1

Received 2 Likes on 2 Posts

Quote:

Originally Posted by tallcaguy

Recommend rubber or polyurethane? I've got a Sport so handling better than stock. Looking for small improvements. Current tires are Premiers. May do Pilots.

Quote:

Originally Posted by deweronick

So if I install the Tanabe springs without doing anything else, Is it a certainty that I'm going to have inner tire wear? If so, I'll get the Megan adjustables.

I would expect for there to be more than ideal negative camber. However, the camber bars can be easily installed later.

Also, I have put Stagg shocks on a GS and a SC previously, and had no complaint. To be honest, I wish I had gone that route with the LS. In certain circumstances the KYBs, seem to have too much compression and not enough rebound.

Reply Like

05-13-17, 10:12 AM

#17

Ecohman

Driver

Thread Starter

Join Date: Nov 2016

Location: Georgia

Posts: 63

Likes: 1

Received 2 Likes on 2 Posts

Quote:

Originally Posted by Ecohman

When I took the car for alignment it needed lower control arm bushings. Now back with new bushings and -1.0 camber on all four corners I am very satisfied, and happy with the KYBs.

Reply Like