techsc400

iTrader: (6)

Hello, I came from SC400 to ES300, and now LS430...
Long time CL member, here... Now, I am on LS forum a lot.
Thank you for the all the information!

Can you help me? Anyone who removed this before?
How to remove this right side panel from the glove box?
Just yank it?

I think that it is part# 8 on the diagram

techsc400

iTrader: (6)

No one knows?

chrispy

iTrader: (21)

When I took my glovebox apart the other day, that piece was still attached to it. I think you will have to disassemble the entire glovebox and undo some screws from the inside.

I found out how to take apart the glovebox from the Data Systems controller installation thread. Pulling the wood trim off was harder than I thought it would be.

techsc400

iTrader: (6)

Thank you for your post, I was hoping that I can just pop it out... avoid all the hassle...

techsc400

iTrader: (6)

Anyone with this experience?

HiloDB1

iTrader: (3)

Ill try to remember to take a look when I get home. I have my glovebox out of my car and I can probably figure it out and post up some pics.

*edit

Do not yank on the panel to try and remove it. You will destroy it. You need to remove the glove box in order to get to the screws that hold that panel in place.

This is a pic of the backside of the panel. There are 3 screws along with the bolt at the bottom that hold the entire glove box in place and tabs.

techsc400

iTrader: (6)

Thank you very much!
for your kind explanation and a pic... I was about to yank that panel....

tazigdad

Hello do you have the bottom of the parts diagram that tells what the different numbered pieces are and what the part number is? I need part number 2.

tazigdad

Part number 2 is a 55512a