|
holy shnikey!
|
Headlight conversion looks cool!!
|
front piece is over done imo
|
Originally Posted by Driverseat
(Post 3428006)
front piece is over done imo
Same here. Overkill. |
heres my ls430. i just got the data controller 2 days ago and now shes dumped! settings are 9 in front and 7 in rear. anyone know how to set the front lower on this data controller??
http://i257.photobucket.com/albums/h...8/DSC01820.jpg[ http://i257.photobucket.com/albums/h...8/DSC01810.jpg http://i257.photobucket.com/albums/h...8/DSC01807.jpg im not satisfied with setting 9 for the front. it looks a little high still... http://i257.photobucket.com/albums/h...8/DSC01827.jpg http://i257.photobucket.com/albums/h...8/DSC01822.jpg |
Originally Posted by samplzone
(Post 3477782)
anyone know how to set the front lower on this data controller??
|
Originally Posted by mikepae
(Post 3477836)
have you adjusted the height sensors before installing the controller? you can always go to a machine shop and have your front height sensor rods shortened with threads added.
|
On your initial setup of the Datasystem controller, if you have selected the "Extra-Down" mode, all you have to do to bring it to "L" (the lowest) is get the setting to show "9", then keeping your finger down on the lower right hand button for 3 seconds, it will now show "L". Wait approx 4 to 5 minutes for it to fully dump and dump it will causing the wheels to go into the fenders. Basically un-drivable. Set that into your memory so you don't have to keep your fingers down next time.
Are those TrafficStars you got there? Cars looking good. :) PS: Make sure before you go "L" that your wheels will clear the fenders, otherwise there is going to be some ugly happenings :( |
Originally Posted by airtime
(Post 3477992)
On your initial setup of the Datasystem controller, if you have selected the "Extra-Down" mode, all you have to do to bring it to "L" (the lowest) is get the setting to show "9", then keeping your finger down on the lower right hand button for 3 seconds, it will now show "L". Wait approx 4 to 5 minutes for it to fully dump and dump it will causing the wheels to go into the fenders. Basically un-drivable. Set that into your memory so you don't have to keep your fingers down next time.
Are those TrafficStars you got there? Cars looking good. :) PS: Make sure before you go "L" that your wheels will clear the fenders, otherwise there is going to be some ugly happenings :( |
That is correct the "L" is undriveable, if you drive w/ L it will go back to 9
|
"L" = bad a** parking stance!!!
|
EDIT.
Great pics, wish I had an LS. |
Originally Posted by junjdm
(Post 3479522)
That is correct the "L" is undriveable, if you drive w/ L it will go back to 9
it automatically goes back to 9, but does it still automatically drop an inch @ 60 mph? |
Originally Posted by Cape Cod
(Post 3481455)
it automatically goes back to 9, but does it still automatically drop an inch @ 60 mph?
|
Originally Posted by anotherLS
(Post 3388285)
^^^junction produce heritage wheels
|
| All times are GMT -7. The time now is 07:30 PM. |
© 2026 MH Sub I, LLC dba Internet Brands