'91 AC/HeaterControls/Clock LCD Broken
#1
Driver School Candidate
Thread Starter
Join Date: Dec 2002
Location: CA
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
'91 AC/HeaterControls/Clock LCD Broken
I recently purchased a '91 LS400 and the LCD display for the AC/Heater Controls/Clock is broken.
Does anybody know where I can get mine rebuilt, or where I can find a used one that is in good cosmetic condition for cheap?
Does anybody know how long it usually takes to have it rebuilt?
Also... I used Gunk to degrease the engine. After hosing down the engine compartment, the car started fine, but it is hesitant when I accelerate. It seems like it's ready to stall when it's at idle. I drove the car for a while, even on the freeway hoping the heat from the engine will evaporate any water that may have collected, but it didn't help. I didn't see a distributor so I didn't cover anything up.
Has anybody had this problem? Can anyone give me some advice on how to get my car running back to normal?
Does anybody know where I can get mine rebuilt, or where I can find a used one that is in good cosmetic condition for cheap?
Does anybody know how long it usually takes to have it rebuilt?
Also... I used Gunk to degrease the engine. After hosing down the engine compartment, the car started fine, but it is hesitant when I accelerate. It seems like it's ready to stall when it's at idle. I drove the car for a while, even on the freeway hoping the heat from the engine will evaporate any water that may have collected, but it didn't help. I didn't see a distributor so I didn't cover anything up.
Has anybody had this problem? Can anyone give me some advice on how to get my car running back to normal?
Thread
Thread Starter
Forum
Replies
Last Post