LS - 1st and 2nd Gen (1990-2000) Discussion topics related to the 1990 - 2000 Lexus LS400

Hazards work......turn signals don't!!

Thread Tools
 
Search this Thread
 
Old 10-14-12, 01:11 PM
  #1  
Kanderson1
Driver School Candidate
Thread Starter
 
Kanderson1's Avatar
 
Join Date: Oct 2012
Location: MD
Posts: 32
Likes: 0
Received 0 Likes on 0 Posts
Default Hazards work......turn signals don't!!

Forum...changed all the fuses under dash & under hood, however
my turn signals do not work. Hazards work fine...but no turn signals. I already purchased a flasher relay, but i haven't replaced it yet. Any suggestions before i change the relay?
Old 10-14-12, 04:51 PM
  #2  
PureDrifter
BahHumBug

iTrader: (10)
 
PureDrifter's Avatar
 
Join Date: Aug 2004
Location: California
Posts: 23,918
Received 94 Likes on 86 Posts
Default

its probably not the flasher relay if the hazards work iirc, it's more likely to be the switch itself or clockspring.
Old 10-15-12, 08:32 PM
  #3  
Glidin316
Driver School Candidate
 
Glidin316's Avatar
 
Join Date: Sep 2012
Location: KS
Posts: 25
Likes: 0
Received 0 Likes on 0 Posts
Default

what year?? have u checked the trunk wire harness? or the Lamp failure module? any burnt solder points/connections. etc.
Old 10-16-12, 02:15 AM
  #4  
Kanderson1
Driver School Candidate
Thread Starter
 
Kanderson1's Avatar
 
Join Date: Oct 2012
Location: MD
Posts: 32
Likes: 0
Received 0 Likes on 0 Posts
Default

1995....funny thing, they were working fine until I changed the tail lights and turn signal light housing all the way around. I didn't have to rewire or change any bulbs.
Old 10-16-12, 10:53 AM
  #5  
cobalt91
Lead Lap
 
cobalt91's Avatar
 
Join Date: May 2012
Location: MI
Posts: 586
Likes: 0
Received 0 Likes on 0 Posts
Default

Probly might want to check the connecters in the tail lights then.
Old 10-16-12, 11:26 AM
  #6  
timmy0tool
Moderator
iTrader: (7)
 
timmy0tool's Avatar
 
Join Date: Sep 2008
Location: 714/949, SoCal
Posts: 6,927
Received 415 Likes on 370 Posts
Default

Originally Posted by Kanderson1
1995....funny thing, they were working fine until I changed the tail lights and turn signal light housing all the way around. I didn't have to rewire or change any bulbs.
did you replace the tails with LED? what did you do different? work backwards from when it was working.
Old 10-16-12, 07:25 PM
  #7  
Kanderson1
Driver School Candidate
Thread Starter
 
Kanderson1's Avatar
 
Join Date: Oct 2012
Location: MD
Posts: 32
Likes: 0
Received 0 Likes on 0 Posts
Default

Im gonna take some time this weekend and
check
Old 10-22-12, 01:37 AM
  #8  
Kanderson1
Driver School Candidate
Thread Starter
 
Kanderson1's Avatar
 
Join Date: Oct 2012
Location: MD
Posts: 32
Likes: 0
Received 0 Likes on 0 Posts
Default

I pull the starter relay.the contacts with dirty. I clean them and the car starts fine now
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
LexusJen13
IS - 1st Gen (2001-2005)
1
07-30-16 08:02 AM
14blk250a
IS - 3rd Gen (2014-present)
3
12-07-14 05:50 PM
MJames23
LS - 1st and 2nd Gen (1990-2000)
8
04-09-12 11:49 AM
Blizzy
SC- 1st Gen (1992-2000)
15
08-08-07 07:56 AM
sc400atl
Maintenance
3
04-25-04 12:36 PM



Quick Reply: Hazards work......turn signals don't!!



All times are GMT -7. The time now is 12:49 AM.