Quick Fitment Question on UCF10
04-04-12, 03:44 AM
#1
Rookie
Thread Starter
Join Date: Apr 2011
Location: Traphouse
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Quick Fitment Question on UCF10
What tire sizes do you guys suggest for 18 x 9 +35 / x 10 +35 with megan LP coils maxed out?
and does anyone have pics of those specs on any ucf10? Thanks, I have been out of the car game for a couple years and decided to finish off my project.
and does anyone have pics of those specs on any ucf10? Thanks, I have been out of the car game for a couple years and decided to finish off my project.
04-04-12, 06:19 AM
#2
Driver School Candidate
Join Date: Feb 2012
Location: Wisconsin
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Are you looking to go low?
I would have to say 225/40,245/40. I'm running 18x9/10.5 +25/20 with a roll up front, rolled and pull in the rears. I have a little bit of poke though. I think with your setup, you should be close to rim flush with fenders with slight camber only.
I would have to say 225/40,245/40. I'm running 18x9/10.5 +25/20 with a roll up front, rolled and pull in the rears. I have a little bit of poke though. I think with your setup, you should be close to rim flush with fenders with slight camber only.
04-04-12, 11:41 AM
#3
Your front wheels will be far too sunken in at 18x9+35 I would suggest running a spacer to have it e flush. The rear will be pretty close to being flush maybe a small spacer will be needed. As for tires run 225/40/18 all around.
Thread
Thread Starter
Forum
Replies
Last Post
