bjo

Hello,
First post and I like the website. A lot of helpful people.
I bought a 91 LS 400 a few days ago and while looking for new wheels and tires, I came across a great deal for 2011 LS 460 wheels. I bough them and would like to run them on my car, but if it doesn't work i can sell them for a small profit.
I already know that the LS 460 bolt pattern is 5*120, while my car is 5*114.5. My question is whether someone on the forum has run a 5*120 wheels with adapters, and if so, which.
Any comments appreciated. I'll try to snap a pic hopefully with the new wheels when all is said and done.
Thanks,
Brian

PureDrifter

iTrader: (10)

some GS guys have run OEM BMW wheels with adapters, but it's going to look VERY aggressive, so the car would have to be lowered/cambered/fender mods to work right. If you bought them for your stock height car you're out of luck, as by the time you factor the spacers in (unless you get a very expensive thin (15mm) set made) they'll be sticking out quite far.

bjo

Thanks I was sort of looking for a thin set. Trying to get a feel for the whether it would be cost prohibitive.

bjo

I just put the wheels up against the car and they sort of look too flashy for my taste.

S30ZG

iTrader: (5)

Do you really think a 18x7.5 +13 (19mm) would really poke that much?

PureDrifter

iTrader: (10)

OP which set of LS460 wheels are you using? the 18s or 19s? 18s are 18x7.5 +32 iirc and the 19s are 19x8 +32. either of these with 15mm adapters will be fine, though if lowered the car may rub in the front without rolling the fneders.

bjo

They are the 18's. Would be great if anyone knows of a picture it could see of a similar setup. May not exist though.

RA40

iTrader: (6)

If you want a digital edited version of wheels, try this forum. There may already be a pic done:
https://www.clublexus.com/forums/photoshop-forum-112/