Hard pedal after new brake booster! 98 LS400
07-17-11, 12:33 PM
#16
Pole Position
I'm pretty certain that everything is hooked up properly, there are only a couple things that hook up to the booster (master cylinder and the vacuum hose). I have the vacuum line hooked up and the hose does not collapse and it does pull good vacuum from the intake.
I also bought the brake booster from KOI auto parts which is just a local parts shop around the tri-state area (usually pretty good stuff).
Under the manual procedures that were stated above, what is the booster pushrod adjustment? Could that be anything worth looking into?
I also bought the brake booster from KOI auto parts which is just a local parts shop around the tri-state area (usually pretty good stuff).
Under the manual procedures that were stated above, what is the booster pushrod adjustment? Could that be anything worth looking into?
07-16-16, 12:26 PM
#17
Driver School Candidate
Join Date: Jul 2016
Location: California
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Same problem
I have a 1992 ls400 and I have the same problem I have to push the brake all the way in and even if I press it all the way in it doesn't want to make a complete stop what should I do ???
Thread
Thread Starter
Forum
Replies
Last Post
