diffusion

I just bought a R Spec Datasystem Controller for my 92 Lexus ls400 UCF11 from Lazy but I'm kind of having troubles with it functioning. The R Spec datasystem connects directly to my stock 89290 air suspension ecu with no proplem, it works, turns on with all the options with digitals, and all the buttons fucntioning perfectly.

There's only one thing, when the datasystem is hook up and powers on my normal light on my cluster flashes consistantly about every one second with out any pause or any stop. Although I did have my switch at the rear left side trunk on instead of off and the ride height setting high or normal still didn't matter.

I've talked to Lazy and he's been a great seller to help guide me through installing and how to work the datasystem controller. I've tried taking it off and putting it back on so many times and check the plugs to be sure but still no luck.

The datasysytem seems to be working some what but not fully functional. It shows the weight on the left side when I sit in the car and when I get out of the car. Besides that it won't go up or down because the normal light in my cluster is flashing and the compressor is not pumping. Anyone have any idea or clues that may be useful will surely be appreciated thank you.

Can anyone please help me out with what I should check or do? I just replace my leaking rear left strut with the struts I bought from ae80siq so it's not leaking at all. All four struts are level and if I just plug only the stock air susp ecu everything works perfectly and the normal flashing light doesn't blink. Please help.

diffusion

Can anyone help me out here? I really want my R Spec Datasystem to be working on my car. Please someone help me out here. I just bought my car about a month and a half and i'm not familiar with air struts. And the main reason why I bought this car and sold my other ls400 that has coils and spring was for this reason to have a datasystem controller for it, which I do now but i'm having troubles. Please help.

Lazy

iTrader: (2)

I got it from ucfjon! He might know more about this then me. I never had that problem when he put it on my car so I am clueless how to fix it..

diffusion

Come on guys anyone? Or is there a certain way that I'm suppose to hook it up or like a certain procedure that I'm suppose to do it? Let me know?

diffusion

Finally, I found the problem. The wire was cut and re-wired and had black tape over it. I took off all the place that had black taped and found that one wire was disconnected. So then I made sure the wire was connected and black taped it again and everything works great now. Easy fix, just had to recheck everything carefully.