LS - 1st and 2nd Gen (1990-2000) Discussion topics related to the 1990 - 2000 Lexus LS400

HELP - engine goes into "limp home mode" and won't give a ECU reading

Thread Tools
 
Search this Thread
 
Old 11-13-08, 01:16 PM
  #1  
Lexstacy40
Driver School Candidate
Thread Starter
 
Lexstacy40's Avatar
 
Join Date: Sep 2007
Location: FL
Posts: 19
Likes: 0
Received 0 Likes on 0 Posts
Red face HELP - engine goes into "limp home mode" and won't give a ECU reading

- A couple of weeks ago the idle at a cold start ran up to 1900 and stayed there. Wouldn't come down until after several minutes. While the idle was up the car was basically in a limp home mode but ran - albeit slow.
- In the past week this has happened a couple of times. Each time same behavior.
- Today, same thing. But it won't go away.

Took it to Lexus and they plugged it in (I suggested to them that it was a faulty O2 sensor or maybe the idle control valve). No reading. No reading. They checked all the fuses, the connectors but couldn't get a reading from the ECU. I had to leave before they "took it in" - something that may have cost me mucho dineros.

On the way home, same limp home mode with raised idle. No power but moves along slowly. AC is shut off, so is the spedometer!! (those two both came back on again after each one of the previous instances).

WHAT IS THIS?
ANY idea?

Could it be the ECU that's bad - or a sensor somewhere?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
340massive
LS - 1st and 2nd Gen (1990-2000)
8
08-10-13 02:39 PM
Dai Kaiju
Performance & Maintenance
1
02-27-12 04:46 PM
grindin8o8
SC- 1st Gen (1992-2000)
15
05-05-11 01:23 PM
Lexstacy40
LS - 1st and 2nd Gen (1990-2000)
6
01-02-09 02:19 PM



Quick Reply: HELP - engine goes into "limp home mode" and won't give a ECU reading



All times are GMT -7. The time now is 01:51 PM.