Notices
LS - 1st and 2nd Gen (1990-2000) Discussion topics related to the 1990 - 2000 Lexus LS400

Please help...

Old Feb 23, 2008 | 08:30 PM
  #1  
MYLSCD's Avatar
MYLSCD
Thread Starter
Driver School Candidate
 
Joined: Feb 2008
Posts: 2
Likes: 0
From: California
Default Please help...

Hi all,

I'm new to this forum. I hope someone will be able to help save my 94 LSCD (CD=400). It has no problem starting but once I try to accelerate the RPM needle dropped all the way down to 0. I hear the rattle noise from underneath it as well. I gave it a new set of spark plugs and fuel filter but no help at all. If anyone ever encountered this kind of problem OR have any suggestions on how to fix this baby, PLEASE...PLEASE help....Thanks

Richard
Reply
Old Feb 24, 2008 | 11:42 AM
  #2  
Bali26's Avatar
Bali26
Pole Position
 
Joined: Sep 2007
Posts: 251
Likes: 2
From: BC Canada
Default

give more information. Did the needle rpm drop or the engine rpm too? when it started etc etc
Reply
Old Feb 24, 2008 | 11:49 AM
  #3  
ewenpg's Avatar
ewenpg
Driver
 
Joined: Feb 2007
Posts: 129
Likes: 0
From: CA
Default

Try checking the IAC (Idle Air Control Valve) for a blockage. It is located near the throttle body. Sometimes carbon gets down in the tube. Also clean throttle body from carbon. You can get a spraycan of Throttle Body Cleaner cheap from anywhere. Take off the air intake manifolds and check that the throttle plates are not sticking.
Check that there is no air getting into the throttel body that does not pass the MAF (Mass Airflow) sensor. Make sure MAF is connected and working.
Try those things for starters Then go electrical.
Reply
Old Feb 24, 2008 | 12:47 PM
  #4  
Sixdown's Avatar
Sixdown
Driver
 
Joined: Dec 2007
Posts: 155
Likes: 0
From: Maryland/Florida
Default

I get a rattle underneath when I accelerate at idle and then let go. Once the RPMs drop down to normal, theres a large rattle, which my lexus mechanic said was due to bad engine mounts. It seems right, but does anyone know if this is true? Maybe its related to your mounts too.
Reply
Old Feb 24, 2008 | 02:35 PM
  #5  
MYLSCD's Avatar
MYLSCD
Thread Starter
Driver School Candidate
 
Joined: Feb 2008
Posts: 2
Likes: 0
From: California
Default

the needle drop but not the engine. The rattle noise seem like something in the CAT. I'm sure that it's not the engine mount.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ankurdave
LS - 1st and 2nd Gen (1990-2000)
7
Mar 13, 2017 08:20 PM
MValentine
LS - 1st and 2nd Gen (1990-2000)
10
Feb 4, 2013 07:41 PM
gripau1
SC430 - 2nd Gen (2001-2010)
4
Aug 13, 2010 04:49 AM
Zoso
SC - 1st Gen (1992-2000)
6
May 16, 2002 04:40 AM


Thread Tools
Search this Thread

All times are GMT -7. The time now is 01:30 AM.