LS - 1st and 2nd Gen (1990-2000) Discussion topics related to the 1990 - 2000 Lexus LS400

Is the LS400 Wheel pattern 5x114.3??

Thread Tools
 
Search this Thread
 
Old 11-09-06, 03:45 PM
  #1  
92soarer
Driver
Thread Starter
 
92soarer's Avatar
 
Join Date: Jul 2006
Location: CA
Posts: 177
Likes: 0
Received 0 Likes on 0 Posts
Default Is the LS400 Wheel pattern 5x114.3??

I was just wondering if the wheels from my SC300 would fit right on an LS400 1991??? 5x114.3??

the front wheels are 19x8.5 and the rear are 19x9.5 and i think both are +35.

Just wondering if the wheels will rub on the LS400 and do I need to roll the fenders??

Advice is gladly needed.

Thanks

David
Old 11-09-06, 04:53 PM
  #2  
importtune
Driver School Candidate
 
importtune's Avatar
 
Join Date: Nov 2006
Location: ca
Posts: 18
Likes: 0
Received 0 Likes on 0 Posts
Default

yeah... the bolt pattern is the same
Old 11-09-06, 04:56 PM
  #3  
trukn1
NELOC Mod
 
trukn1's Avatar
 
Join Date: Mar 2006
Location: MD
Posts: 5,201
Likes: 0
Received 9 Likes on 9 Posts
Default

The bolt pattern is cortect, 5X114.3 and the lugnut pattern is 12mmX1.5 for both the SC and the LS. Should fit just fine, may have to roll depending on tire size. Both the Early LS and the SC have high offsets.
Old 11-09-06, 04:58 PM
  #4  
ATSOU
Lexus Champion
 
ATSOU's Avatar
 
Join Date: Mar 2002
Location: CA
Posts: 3,027
Likes: 0
Received 3 Likes on 1 Post
Lightbulb

Wheels r goin to fit just fine.

Depends on the tire sizes & the suspension setup u r going to run.
Most likely u'll need to mod the wheelwells a bit.
Old 11-09-06, 08:15 PM
  #5  
92soarer
Driver
Thread Starter
 
92soarer's Avatar
 
Join Date: Jul 2006
Location: CA
Posts: 177
Likes: 0
Received 0 Likes on 0 Posts
Default Should I trade my sc300 for LS400

Guys, I asked the question because there is this guy that wants to trade me my sc300 for his ls400.

My sc300 is lowered on Esplir springs Tokico Shocks
Re-done Interior with two tone Gray
2005 ES steering wheel
19" Staggered Wheels but those will go on the LS I will trade for.
I also put new belts and spark plugs and cap and rotor on my SC

Just wondering what you guys think.

My plans for the LS would be to go Full VIP for that 91 LS400
lower the car, add kit, daily driver. etc....

Advice please
Old 11-09-06, 08:55 PM
  #6  
trukn1
NELOC Mod
 
trukn1's Avatar
 
Join Date: Mar 2006
Location: MD
Posts: 5,201
Likes: 0
Received 9 Likes on 9 Posts
Default

Is gonna be a matter of what look you trying to pimp. LOL!!! Both cars are very nice however, you will be trading speed for a heavy sled. The first gen LS is a very heavy car and definately no speed demon, although it does quite well. Sounds like you are pretty much done with the SC, however, let me warn you that mod parts for the first gen LS are gonna be very hard to find. You will spend hours looking at the computer screen, cursing yourself about why you traded, looking for parts for the first gen. It will be a difficult task, however not impossible. You will find yourself importing alot of parts in from Japan. Just depends on how much research you wanna do to find stuff. Of Course, fabrication is another option as well. LOL!!!
Old 11-09-06, 09:08 PM
  #7  
HKS_IS300
Rookie
 
HKS_IS300's Avatar
 
Join Date: Jan 2005
Location: CA
Posts: 79
Likes: 0
Received 0 Likes on 0 Posts
Default

the wheels should fit. most if not all rwd japanese cars are 5x114.3
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ttyR2
LS - 1st and 2nd Gen (1990-2000)
3
05-04-13 10:15 PM
97-SC300
SC- 1st Gen (1992-2000)
8
08-09-07 07:46 PM
agc
LS - 1st and 2nd Gen (1990-2000)
1
05-31-05 03:17 PM



Quick Reply: Is the LS400 Wheel pattern 5x114.3??



All times are GMT -7. The time now is 08:16 AM.