jvsc300

iTrader: (4)

i just take some pics..... sorry about the quality my camera phone is sucks...



this is a apexcone hid kit 6000 55w

ELL Y

iTrader: (1)

JVSC, might be your picture but the right side looks uneven, no?

jvsc300

iTrader: (4)

no.....they look like that because the door of my home is open

Inzane089

whats the little bulb thats right next to the head light? the blueish looking blub

jvsc300

iTrader: (4)

is a 194 (t15 white)

jimmyXthai

iTrader: (2)

i got my lights today, took about a week and a half

818sc400

thats super bright! does it blind oncomming traffic?

Mr.412

still waiting on kit will update as soon as comes in
DDM said it was mailed out on monday

jimmyXthai

iTrader: (2)

this is 5 feet away and up a driveway

10 feet away head on

camera is on the roof

35w 45k

818sc400

jimmy did you also use the 55w 6000k kit? im deciding on whether or not to pull the trigger on these

jimmyXthai

iTrader: (2)

mine are 35w 45k

Inzane089

still waiting on mine! oh and guys can i get the is a 194 (t15 white) at like a local part store? or do i need to order them? i kinda want blue. also on my head lights all that comes on is the low beams and side markers. no day time running lights and stuff like that. i got a 93 sc3 so no fogs either... just the turning lights.

jvsc300

iTrader: (4)

The wiring is simple. You get one relay and one 30 amp fuse/holder.

Then u connect the fuse holder to battery and to the relay.

The relay has a ground pin which you ground to the neg battery.

Then you quick splice a cable to the pos parking light cable and run that to the relay.

Then you gotta 1 wire from each fog light to the ground of the battery. (2 wires total)


Then finally you gotta connect both fogs to the relay. So you run a cable from each fog and then combine the cables together and connect them to the relay.

Also they make sockets that connect to the relay, so you dont have to solder the wiring onto the relay. I just used some female spade connectors. And if you dont know how to solder you can just use Crimp Butt Splice to connect wires together. Also make sure to use heat shrink tubing over either solder or crimpers.

Hope that helps.

Inzane089

thanks bro so much!

jgscott

iTrader: (1)

Can you guys tell help me with a few q's ?

Wil the 55 w one be safe in the SC, no melting ? Are they to bright, like do they blind oncomming traffic ?

Which xxxx K color is the whitest or closest to the Lexus new car factory ones. The new Lexus car one are suppose to image the sun.