![]() |
Hid's
I'm looking to get a set of HID's for my 97 SC 300. what brands are you guys using? where did you buy them? I'm looking at sets on ebay but not sure what i should stay away from. any info would help. Thanks
|
dont buy off ebay..............:egads:
|
I second that ... and if the "hid kit" retails for 9.99, it is probebly NOT an hid kit :rolleyes:
|
please use the search function. Manaray did a great write up on HID kits for our SC's a while back
|
AFter much research from searching on this site and HIDforums.com
Which kit for the SC? Philips 6000 K kit. How much? $500 Where? www.kmimports.com Ken will fix you up. 30mins installing and you are ready to go! BIGd |
Originally posted by BigD026 AFter much research from searching on this site and HIDforums.com Which kit for the SC? Philips 6000 K kit. How much? $500 Where? www.kmimports.com Ken will fix you up. 30mins installing and you are ready to go! BIGd -Bryan |
Originally posted by LexAristo Email Ken @ sales@kwimports.com. When you "Bryan" referred you, he will only charge you 475.00. Hope that helped. -Bryan |
Originally posted by siniquezu For that much, you can retrofit... |
if i get plug and play, will i hafta worry about glare or the cut off? i drive an rx300 and was considering a plug and play kit but after reading about some drawbacks, i'm starting to wonder...
Originally posted by LexAristo Time + money will be over 500. Plug and play is more complete and takes less than 20 min to install. Also retrofitting means de-linging your headlights.:eek1: |
Originally posted by StrmRdr23 if i get plug and play, will i hafta worry about glare or the cut off? |
I have a RX300 with aftermarket HID's from autolamps and all I had to do was aim the lights a little lower. I'm very satisfied with them. I will admit that sometimes I think about it and wonder if I should have gone for a projector retrofit. Due to the time involved in having to send them out to be retrofitted, I decided to go with aftermarket HID's.
J |
you got any pics?
Originally posted by jeremyp111 I have a RX300 with aftermarket HID's from autolamps and all I had to do was aim the lights a little lower. I'm very satisfied with them. I will admit that sometimes I think about it and wonder if I should have gone for a projector retrofit. Due to the time involved in having to send them out to be retrofitted, I decided to go with aftermarket HID's. J |
Originally posted by LexAristo Time + money will be over 500. Plug and play is more complete and takes less than 20 min to install. Also retrofitting means de-linging your headlights.:eek1: also a retrofit will be 50% brighters than kits usually because the projectors are made for the HID bulb, and you will also have perfect cutoff line and perfect light ditrubution with no glare/blackspots. |
| All times are GMT -7. The time now is 10:35 AM. |
© 2026 MH Sub I, LLC dba Internet Brands