TX FS/FT:2JZ-GTE Swapped GS300
#1
Rookie
Thread Starter
iTrader: (1)
Join Date: May 2009
Location: Texas
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
FS/FT:2JZ-GTE Swapped GS300
First and foremost let me say you will be hard pressed to find a cleaner swapped 16 year old Lexus.The swap was done right and appears to be factory.The swap was done by the infamous Ken Chao at JDM motors here in Texas and runs/flawlessly.No check engine lights,No traction control lights.All other work has been done by the dealership
My only reason for selling is I found another car that already has the single Turbo swap done.So this toy must go.The car has never been on a dyno and has only been to the track 1 time and ran a best of 13.42@107mph on 15psi with a crappy 2.3 60 foot time.So obviously there is plenty of room to grow.I see no reason why a 12.50 isn't possible with a little more boost and some drag radials.
On to the good stuff
Make: Lexus
Year: 1999
Model: GS300
Price:$9,500
Miles: 128k
Title: Clean Texas Title
Contact: singleturbocobra@yahoo.com
MOD LIST
Aristo 2JZ-GTE VVTi swap
Stock JDM Twin Turbos
Aristo Auto Trans and driveshaft
Aristo Fuel Pump
Greddy Boost cut defender
3 Inch CVT Down pipe
3 Inch Custon straight pipe exhaust
Suspension
Megan LP Street series Coil overs Front
Meagan LP Street series Coil overs Rear
SPC front adjustable Caster/Camber arms
Moog lower ball joints
Moog Bushings
Figgs caster arms
Wheels
19 Inch Toyota Highlander OEM wheels
1/4 inch wheel spacers
Brand new 235/35/19 Tires
Fresh 2 week old alignment
All Gauges work like factory and the boost gauge was hidden to keep the sleeper look going throughout.I know im leaving something out,but if you don't see it in the pics or vids don't hesitate to ask.
My only reason for selling is I found another car that already has the single Turbo swap done.So this toy must go.The car has never been on a dyno and has only been to the track 1 time and ran a best of 13.42@107mph on 15psi with a crappy 2.3 60 foot time.So obviously there is plenty of room to grow.I see no reason why a 12.50 isn't possible with a little more boost and some drag radials.
On to the good stuff
Make: Lexus
Year: 1999
Model: GS300
Price:$9,500
Miles: 128k
Title: Clean Texas Title
Contact: singleturbocobra@yahoo.com
MOD LIST
Aristo 2JZ-GTE VVTi swap
Stock JDM Twin Turbos
Aristo Auto Trans and driveshaft
Aristo Fuel Pump
Greddy Boost cut defender
3 Inch CVT Down pipe
3 Inch Custon straight pipe exhaust
Suspension
Megan LP Street series Coil overs Front
Meagan LP Street series Coil overs Rear
SPC front adjustable Caster/Camber arms
Moog lower ball joints
Moog Bushings
Figgs caster arms
Wheels
19 Inch Toyota Highlander OEM wheels
1/4 inch wheel spacers
Brand new 235/35/19 Tires
Fresh 2 week old alignment
All Gauges work like factory and the boost gauge was hidden to keep the sleeper look going throughout.I know im leaving something out,but if you don't see it in the pics or vids don't hesitate to ask.
Last edited by 2JayZ; 02-23-15 at 10:38 AM.
#6
Rookie
Thread Starter
iTrader: (1)
Join Date: May 2009
Location: Texas
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
The dashboard is from what appears to be a TV install by the previous owner.It has since been professionally repaired but isn't perfect.In the process of getting more pics for another member but will post pics after work.
Trending Topics
#10
Rookie
Thread Starter
iTrader: (1)
Join Date: May 2009
Location: Texas
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
Since all the potential buyers are from out of state I made this video to show the condition as of today and not when the pics were taken.Also a idle and cruising vid to hear how mellow the exhaust is .I hope this helps give you an idea
#14
Driver
iTrader: (2)
Join Date: Sep 2010
Location: AZ
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
Would this pass OBD II testing?
Here in AZ they plug an OBDII scanner to see if there are any codes. If everything is fine it will pass. Only issue is the fact that it is swapped, so it might no pass OBD testing. If you have any information on this let me know.
Thanks, beautiful car!
Here in AZ they plug an OBDII scanner to see if there are any codes. If everything is fine it will pass. Only issue is the fact that it is swapped, so it might no pass OBD testing. If you have any information on this let me know.
Thanks, beautiful car!
#15
Rookie
Thread Starter
iTrader: (1)
Join Date: May 2009
Location: Texas
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
Would this pass OBD II testing?
Here in AZ they plug an OBDII scanner to see if there are any codes. If everything is fine it will pass. Only issue is the fact that it is swapped, so it might no pass OBD testing. If you have any information on this let me know.
Thanks, beautiful car!
Here in AZ they plug an OBDII scanner to see if there are any codes. If everything is fine it will pass. Only issue is the fact that it is swapped, so it might no pass OBD testing. If you have any information on this let me know.
Thanks, beautiful car!